K40 RLS2 Quick Reference Manual

RLS2 QUICK REFERENCE GUIDE

Menu / Customizable Settings

Press and hold DIM / MENU button for 3 seconds. The voice will
•
announce, "Menu," and the display will read MENU .
Press and release DIM / MENU button to scroll through the
•
preferences until you reach the option to be changed.
To change setting, press and release
•
the display and voice will announce the change.
Press and release DIM / MENU button to continue scrolling to
•
another preference.
Menu Options
(in order displayed)
1 Voice Type
2 Audible Voice
3 Wake-Up
4 Speed Displayed
5 Compass Heading
6 Traffic Sensor
Filter
7 mph / kph
8 Automute
9 X-Band
10 K-Band
11 Ka-Band
12 Laser
13 Mute Locations
14 Alert Locations
15 Factory Reset
Default
Setting
Female Choose male or female voice for audio alerts.
On For all initial audio alerts: "Voice On" uses
voice; "Voice Off" uses tones only.
Wake- "Wake-Up Long" is a standard 5-second
Up sequence. "Wake-Up Short" uses an abbre-
Long viated sequence.
On "Speed On" displays current speed in
mph / kph when driving over 5 mph / kph.
"Speed Off" turns off this display.
On Displays current compass heading when
driving over 5 mph / kph.
Off Enables filtration of K-Band radar signals
from traffic flow sensors.
mph Choose mph or kph.
Off Automatically reduces volume by 50% after
5 seconds.
On Enables the detection of X-Band radar.
On Enables the detection of K-Band radar.
On Enables the detection of Ka-Band radar.
On Enables the detection of laser.
N/A Clears all stored muted locations. See Pg. 12
N/A Clears all stored alert locations. See Pg. 13
RESET Original factory default for all settings.
^
or button. Both
Description