Using The Video Call Feature - Samsung SGH SGH-Z400 User Manual

Call functions

Using the video call feature

In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see another
person on the screen during a conversation. The
other person's phone must support the video call
feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Answering a video call
When you receive a video call, answer a video call as
receiving a voice call. Press <Show me> to allow
the caller to see you.
Using video call options
During a video call, press <Options> to access the
following options:
• Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
• Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit, or back to the phone.
• Mute camera/Unmute camera: turn off or on
the camera.
• Mute voice/Unmute voice: turn off or on the
microphone.
28
• Mute camera & voice/Unmute all: turn off or
on the camera and the microphone.
• Mute key tone/Unmute Key tone: turn off or
on the key tones.
• Zoom: display the zoom control bar and zoom in
or out by pressing [Up] or [Down].
• Switch camera: switch between the front
camera lens and rear camera lens.
• Brightness/Hide brightness: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
• Effects: change the colour tone of the image.
• Hide information/Show information: hide or
display information about the video call.
• Send DTMF: send Dual tone multi-frequency
(DTMF) tones as a group after entering the entire
number you need to send or retrieving a number
from Contacts.
• Video quality: change the image quality of the
camera.
• End call: disconnect the video call.
• Save to Contacts: save the entered number to
Contacts.
• Send text message: send a new SMS message.
• Save to memo: save the entered number to
memo.