Table of Contents
Advertisement
Quick Links
Churchill Way, Lomeshaye Industrial Esate, Nelson, Lancashire BB9 6RT, England
Tel: (01282) 695 500 Fax: (01282) 695 511 Helpline: 09066 191 133*
Email: sales@voltek.co.uk Web site www.voltek.co.uk
*Helpline Calls Cost 60p/min Open 9am to 5pm Mon to Fri
Specifications subject to change without notice. Ó2004 Voltek Automation Ltd. Issue 1
INSTALLATION
SUPERCAM 2
The SuperCam 2 is a combined camera and PIR detector with a built in microphone and
loud speaker providing you the ability to 'see' then talk to who ever is outside your property
using your own TV set and the chime box . The Chime box supplied with the camera will sit
neatly on top of your TV or VCR allowing you to monitor and control the system.
KEY PRODUCT FEATURES
•
Black & white or colour camera with wide viewing angle.
•
Built-in high quality PIR sensor for detecting intruders / visitors.
•
Loud Speaker built in to your Camera providimg the option of talking to your visitors
outside the house
•
Pre-connected 20 metre lead. Extendable up to 100 metres.
•
Will connect to any UK television or video recorder that has a SCART socket,
making the installation very simple.
•
Chime box offers 2 camera capability
SYSTEM CONTENTS
Chime box
SuperCam2
Dual Phono
fixing kit
Connecting
Lead
INSTRUCTIONS
CT150 / 160
18m cable
Power
Phono to
supply
scart adapter
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Voltek SuperCam 2 CT150
- Page 1 Tel: (01282) 695 500 Fax: (01282) 695 511 Helpline: 09066 191 133* Email: sales@voltek.co.uk Web site www.voltek.co.uk INSTRUCTIONS *Helpline Calls Cost 60p/min Open 9am to 5pm Mon to Fri Specifications subject to change without notice. Ó2004 Voltek Automation Ltd. Issue 1...
- Page 2 INSTALLING THE SUPERCAM2 Before starting the installation we recommend that you temporarily connect the SuperCam2 to your TV or VCR to help determine the best mounting position. There are two connection methods shown, choose the method that suits your requirements the best. If you are not using a VCR, connect the SuperCam2 to your TV as shown.
- Page 3 Camera Lead Connectors 6 pin mini-DIN plug To install your 2nd camera you will require the Voltek CT151/161 which will plug directly into the Cam2 socket on the chime box. The power must be switched off when 18 Metre Lead...
- Page 4 • The camera will work in low light conditions, but ensure a light, such as a GETTING THE BEST FROM YOUR SUPERCAM 2 200W tungsten halogen lamp, is fitted near to the camera for good visibility at night-time. IF THE SCART SOCKET IS IN USE, OR THE PICTURE IS TO BE VIEWED ON MULTIPLE TVS: •...
- Page 5 USING THE CHIME BOX (continued) Cycle Time Setting ( Time Taken to switch between cameras) To alter the cycle time press both the “Auto” and “Manual” buttons on the front of the unit simultaneously. Each flash of the LED is one extra second of cycle time added.
- Page 6 USING THE CHIME BOX Motion Detection The full alarm sounds only when a new event is detected. A shorter reminder alarm sounds if motion continues in front of the same camera. However if the Chime Box changes to the other camera the full alarm will sound. The current view is paused for a minimum of 2 seconds even if the monitor de- tects motion on the other camera.
Need help?
Do you have a question about the SuperCam 2 CT150 and is the answer not in the manual?
Questions and answers