Slate Digital VRS8 Quick Start

Use supplied Connects to
VRS8 PSU PCIe card via MIDI I/O
15V DC 5A HDMI cable
15 VDC
MIX LINK
Thunderbolt
Connects software mixers
ports
of multiple units
DI Inputs
Switch to INST, replaces MIC/LINE
Switch to LINE, MIC/LINE on rear panel active
MIC/LINE INPUTS 1-8
BASIC SETUP
INPUTS
1-8 Rear Panel Inputs feature combo jacks - XLR feeds mic input, TRS feeds Line Input
Phantom Switched via front panel
LINE OUTS
1-2 Are Main Mix from Software Panel - Use for Speakers - controlled by MONITOR LEVEL knob
WORD CLOCK I/O
3-4 Source changes with MODE selection, see Software Panel - Mirrors send to headphones (Front Panel)
5-8 Are fed from DAW 5-8
PAD GAIN CONTROL Channels 1-8
Switches in 20dB Shared gain control for Mic, Line and Inst levels
pad to Mic Input
LINE OUT 1-2
THUNDERBOLT
CONNECTION
VRS8 Quick Start
Signal/Clip
BiColor
LED
PHANTOM
Switches +48V
Channels 5-8
HEADPHONES
PHANTOM
Phones A & B Level control and output jacks
Switches +48V
Source changes with MODE selection, see Software
Channels 1-4
Panel - Mirrors send to Line Out 3-4 (Rear Panel)
MONITOR LEVEL
Controls Line Out 1-2 Trim
Use for Control Room Speakers, or set
at max when using monitor controller
VRS8 Hardware
Hardwired Chipset
Temperature Compensated TCXO Clocking
LLN (TM) Technology
DC Coupled Outputs for incredible low-end drive
VMS Mic Preamps
8 Mic/Line Inputs
2 FET DI Inputs
MIDI IO
Word Clock IO
MIX LINK IO
PCIe and Thunderbolt Connectivity
Phantom Power
Easy to use with and without a monitor controller
Discrete Headphone Amps
POWER SWITCH
Ensure VRS8 is ON before
booting computer or
installing software