Hanna Mail Chime User Manual page 3

STEP 2
1. Peel off the protective cover on one side of the double faced tape
and stick the tape on the side of the Sensor for your type of mailbox
as shown below.
2. Peel off the cover on the other side of the double faced tape and
stick the Sensor on your mailbox as shown below.
Curb Side
Place top edge of Sensor
towards top of mailbox lid.
Place top edge of Sensor towards
the hinges of the mailbox. Locate
the Sensor at the bottom of the lid.
Slot Type
Place top edge of Sensor towards
the hinges of the mailbox.