1. Manuals
  2. Brands
  3. AKAI DIGITAL Manuals
  4. Mixer
  5. DD1500x-II
  6. Operator's manual

AKAI DIGITAL DD1500x-II Operator's Manual

Disk drive unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DAW
DISK DRIVE UNIT
Operator's Manual
WARNING
To prevent fire or shock hazard, do not
expose this appliance to rain or moisture.
970319 Printed in Japan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DD1500x-II and is the answer not in the manual?

Questions and answers

Summary of Contents for AKAI DIGITAL DD1500x-II

  • Page 1 DISK DRIVE UNIT Operator’s Manual WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 970319 Printed in Japan...
  • Page 2 WARNING!! To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 1-En CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3 4. Set the DD1500x-II so as not to prevent its ventilation (by the fan unit on the rear panel). Also, if you rack- mount the DD1500x-II with other devices, be sure to keep at least 10 cm over and under the DD1500x-II for good air circulation.
  • Page 4 WARNING THIS APPARATUS MUST BE EARTHED IMPORTANT This equipment is fitted with an approved non-rewireable UK mains plug. To change the fuse in this type of plug proceed as follows: 1) Remove the fuse cover and old fuse. 2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A or BSI approved type. 3) Refit the fuse cover.
  • Page 5 FCC warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a copmmercial environment.
  • Page 6 AVIS POUR LES ACHETEURS CANADIENS DU DD1500x-II Le présent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

  • Page 7: Warranty

    Warranty AKAI Electric Co., Ltd., warrants its products, when purchased from an authorized AKAI dealer, to be free from defects in materials and workmanship for a period of 12 (twelve) months from the date of purchase. Warranty service is effective and available to the original purchase only, and only on completion and return of the AKAI Warranty Registration Card within 14 days of purchase.

  • Page 9: Panel Descriptions

    Introduction Thank you for buying an AKAI DD1500x-II Disk Drive Unit. The unit is designed for exclusive use with the DD1500 Digital Audio Workstation. With a Nikon DD53 magneto optical disk drive that conforms to 130 mm Optical Disk ISO Standard installed, you can use the MO disks of 2.6G, 1.3G and 650M Bytes for recording or playback of digital audio signal.
  • Page 10 The DD1500x-II's disk drive is carefully adjusted for optimum performance when it is shipped from the factory. Special tools are necessary to make such adjustments to the DD1500x-II so please do not try to adjust it yourself. If the unit does not operate properly, or shows significant change in performance, consult...
  • Page 11 Maintenance and Regular Checks Regular maintenance or checks are important for proper operations of the DD1500x-II and keeping the unit in optimum condition. Maintain the unit in the following points: Cleaning the Magneto Optical Disk Drive To maintain the disk drive, we suggest cleaning the drive once a month. Use the separately sold general lens cleaning cartridge to remove dirt and dust on the lens inside the disk drive.

  • Page 12: Dip Switches - Setting Scsi Id

    DIP SWITCHES - SETTING SCSI ID If you have just one DD1500x-II, you need not concern yourself with this too much as the correct SCSI ID will have been set at the factory. The default settings for a single drive is SCSI ID#0 and the rear panel DIP...

  • Page 13: Dd1500X-Ii Specifications

    DD1500x-II Specifications Power requirements : 100 - 240 V AC, 50/60 Hz, 40 W /consumption Dimensions : 483 x 88.1 x 408.8 (W x H x D, mm), EIA 2U Weight : 7.9 kg 408.8 DISK DRIVE UNIT POWER Operating temperature : 5~40 °C (40~105 °F)
  • Page 14 DD53 Rear Panel Connector P o w e r Jumper Block SCSI Connector 50-pin SCSI connector 50-pin terminal for SCSI connection DC Power connector Connector for supplying power Jumper block Connector Pin Signal Name *Library Interface Eject LED pipe *PWRDN REQ Drive present (Grounded) SCSI TERMPWR SCSI TERMPWR SRC...

Table of Contents