Summary of Contents for SignWarehouse.com EnduraPRESS SA12
- Page 1 SA12 USER MANUAL © SignWarehouse Inc 2614 Texoma Drive Denison, TX 75020 ph: 800-899-5655 Technical support contacts Phone: 800-966-1783 email support@signwarehouse.com...
-
Page 2: Specifications
Pressure Knob LCD Control Panel Power Switch Teflon Coated Heating Platen Silicon Pad Base Specifications: Model NO: ENDURAPRESS SA12 Voltage: 110V/60Hz Power: 1.4kW, Control Panel: LCD Control Panel Time Range: 0~999sec. Temp. Range: 0~480°F Maximum material width: 1" Packaging: Corrugated Paper Carton... -
Page 3: Read Before Using
OPERATING INSTRUCTIONS READ BEFORE USING 1. Check the voltage before using it. The correct voltage is 110-120V/60Hz 2. Turn off the machine when not in use, and remove the power plug from scoket. 3. Grasp the handle firmly when opening. 4. -
Page 4: Control Panel Operation
Control Panel Operation Page 1: Temperature Set button Touch Screen Control Panel. Touch up or down arrow to adjust Touch "Set" to activate menu. temperture. Page 3: Celsius or Fahrenheit. Page 2: Time Touch up or down arrow to adjust press cycle time. Touch up or down arrow to change temp display from Farhenheit to Celsius. -
Page 5: Heat Transfer Application Guidelines
Heat Transfer Application Guidelines These are general guidelines. For specific time and temperature settings for specific films and/or transfer papers, please refer to the instructions for that particular product. TRANSFERS PRINTER MARK TEMP. TIME PRESSURE Ricoh, Epson Sub. Paper Polyester 400°F 25~30sec. -
Page 6: Troubleshooting Tips
Troubleshooting Tips Q. Why isn't my heat transfer vinyl sticking to the fabric? A. This can be caused by three things. Insuficient pressure, or temperature, or time. Time: Some heat transfer films need a few seconds to cool before you remove the liner. Try a warm or cold peel first. -
Page 7: Warranty
Wiring Schematic 6. WARRANTY Thank you for choosing our products, you are entitled to one year free warranty service for our products. All exceeds warranty period we will still provide technical supports and maintenance guidance. For further assistance, please contact SignWarehouse technical support:... - Page 8 • Toll Free Phone: 800-966-1783. • email: techsupport@signwarehouse.com...
Need help?
Do you have a question about the EnduraPRESS SA12 and is the answer not in the manual?
Questions and answers