LightSpeed Technologies TOPCAT ACCESS WITH ACTIVATE DAILY Operation Instructions

TOPCAT ACCESS WITH ACTIVATE
DAILY OPERATION INSTRUCTIONS
ENSURE THE SYSTEM IS POWERED ON
1. Locate the 24V power supply and power cable and connect the AC power cord into
the DC power supply. Insert the DC connector into the DC Power jack on the back
and plug the AC power cord into an electrical outlet.
2. Press the Activate Station power button to power on the Topcat. When powered
on, the blue LED on the speaker panel will glow.
USING THE FLEXMIKE
3. Remove microphone from charger and place the microphone around your neck.
Ensure the top of the microphone is at the collarbone.
4. Press the power/mute button. The teacher status will turn blue, indicating the
microphone is active.
5. Microphone volume may be adjusted at the microphone by using the UP/
DOWN buttons on the side of the Flexmike. It may also be adjusted by using the
Microphone volume buttons on the front of the Activate.
USE ACTIVATE STATION AS A WIRELESS AUDIO LINK
6. Plug your external audio equipment (for example, laptop), into one of the input jacks on
the back of the Activate labeled "Aux Input" using a 3.5mm patch cable.
7. Adjust volume at the audio source. If necessary, further volume adjustment may be
made using the Audio In volume buttons on the front of the Activate.
8. In addition, you may use the "Input" jack on the side of the Flexmike or the Sharemike
for audio integration.
CHARGE FLEXMIKE NIGHTLY
9. Place the Flexmike into the charger. The power button light will glow red and the Mic
status light will glow blue. When a Flexmike is fully charged, the power button light on
the mic will change to green.
For futher instructions on capturing audio and video using the Activate App, and for complete
operating instructions, go to www.lightspeed-tek.com/TCA-usermanual (or scan the 2D
barcode below).
L i g ht s pe e d Techn ol og ies
w w w.l i g h t s p ee d- tek .co m / 80 0.7 32 .89 99 / 503 .68 4.55 38
7
5
2
6
2
9
QS0539US01-3
1
Power / Mute
4
5
8
3