Call Settings - Samsung SCH-R850 Series User Manual

Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
From the Settings menu, select Sounds Settings
1.
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
Select the desired Alert option setting (On or Off).
2.
To save your new alert settings and return to the Sound
3.
Settings menu, press the OK soft key.
Key Tone
DTMF Tone Length lets you select the length of the DTMF tones
that the device sends when dialing.
From the Settings menu, select Sounds Settings
1.
Tone. The following options appear in the display:
113
• Tone Level — Set Key Tone level to High, Medium/High,
• Tone Length:
➔
Alerts.
To save your new setting and return to the Sound Settings
2.
menu, press the OK soft key.
Vibrating Alert
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
From the Settings menu, select Sounds Settings
1.
Vibrating Alert.
Select On or Off. You are returned to the Sound Settings
2.
menu.

Call Settings

Call Answer
You can select a specific answer mode when you receive an
incoming call.
From the Settings menu, select Call Settings
1.
Answer.
➔
Key
The following call answer settings appear in the display:
Medium, Low/Medium, Low, or Silence.
– Short — Default setting.
– Long — Select this option if you experience frequent misdialed
numbers.
➔
➔
Call