ISDS205C PC SYSTEM REQUIREMENTS Win7,Win8,Win10 Windows XP, Pentium or higer processor USB2.0 High speed port. 512MB RAM 1GB hard disk space InstruStar Electronic Technology http://www.instrustar.com/...
ISDS205C 1.Introduction ISDS205C dual-channel digital oscilloscope, with "low-cost, high-performance" as the design goals. well-designed bandwidth of 20M, 48M sampling rate, 2 channels, alternating support X-T and XY alternating pattern of two-channel virtual oscilloscope, spectrum analyzer, data recorder and logic analyzer. Logic analyzer support our Logic software and Saleae Logic 2 kinds of software, Saleae Logic supports SPI, IIC, UART, etc.
Page 5
Note: The specific speed recorder with computer processing speed, and if use high sampling rate, the situation may break. Logic Analyzer Channel 8 channel: 250K~24M Hz Sample 16 channel: 250K~16M Hz Sample points 1M-2GB Saleae Logic Logic Analyzer InstruStar Electronic Technology http://www.instrustar.com/...
Please refer to the "Data Recorder.pdf". 6.Logic Analyzer After the success of USB devices, data recoder, equipment selection drop-downcombo box will appear ISDS205C(1.0) (N) option, choose a good future, the interface in Figure 6.1. 6.1 Basic control 6.1.1 Channel Control Start or Stop Capture.
Need help?
Do you have a question about the ISDS205C and is the answer not in the manual?
Questions and answers