Tivdio T-116 User Manual

Queue wireless calling system

Advertisement

Quick Links

Queue Wireless Calling System User Manual

Product introduction:

Thanks for using our company's wireless calling system, it adopts RF wireless technology with
millions of different learning codes. The system consists of 1 call button keypad and 20 portable
receivers, the receiving pager supports 999-channel extensions, the call button keypad has 20
battery charging slots. Each receiver is rechargeable and labeled with a number, in standby status,
it is plugged into the charging slots, while the guest places an order, he(she) will be dispatched
one receiver with a number, when the order is ready, the waiter will press the keypad to call the
number, the guest will get it through the buzzer/vibration/LED indications.
The queue system greatly improves the work efficiency and avoid the guest waiting in a long
queue. It is widely used in fast food restaurant, church, dessert shop, auto 4S shop, food truck or
other queue occasions.

The diagram of the call button keypad

接收器:Receiver
广告贴纸:Number paper
电源:Power in
天线:Antenna

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-116 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tivdio T-116

  • Page 1 Queue Wireless Calling System User Manual Product introduction: Thanks for using our company's wireless calling system, it adopts RF wireless technology with millions of different learning codes. The system consists of 1 call button keypad and 20 portable receivers, the receiving pager supports 999-channel extensions, the call button keypad has 20 battery charging slots.
  • Page 2 充电插槽:Charging slot 呼叫键盘:keypad area The diagram of the receiver 透明片:Transparent cover 广告贴纸:Number paper 指示灯:LED 广告纸:Paper slot 录码:Pair 模式:Mode 正面:Front 复位:Power on/off Reset 侧面:Side 背面:Back 内置电池:Built-in battery 充电脚:charging pins Technical data Receiver Working voltage DC 3.7V (Rechargeable battery) Charging voltage DC 5V Working frequency 433.92MHz Standby current...
  • Page 3 Decoder Learning code (AM) Dimension 104*50*8mm Keypad call button Working voltage DC 5V/8A Working frequency 433.92MHz Standby current 24±5mA Transmit current 100±30mA Encoder Learning code (AM) Dimension 280*158*34mm Operation instruction 1. Open the package, connect the call button keypad to power, it executes the self-testing procedure, then power icon turns on.
  • Page 4 of the receiving pager is always bright, then press the call number on the keypad, the pager gets the signal and yellow lamp turns off and accompanied by buzz and vibration reminding, which represents the success of the code. 2. Deleting - The pager is in standby state, press and holds on the “Set” button for 5 sec, the receiving indicator light goes from yellow to extinguish, then release the button, all the paired call buttons will be deleted.
  • Page 5 The distance of some pager The power of battery is low. Charge the battery in time. gets near. Pager cannot get any signal The pairing is deleted; The Pair the pager again to the from keypad call button. number is not correct. keypad.

Table of Contents