Table of Contents
Advertisement
Getting started
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
jack at the bottom of the phone.
Make sure that the arrow on the connector is
facing up, as is the phone.
2. Plug the adapter into a standard AC wall outlet.
The battery strength icon on the display shows
that the battery is charging.
3. When charging is finished, unplug the adapter
from both the power outlet and the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
Note: You must unplug the charger before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
18
Low battery indicator
You can easily tell if your battery needs to be
recharged by checking the Battery Status icon(
at the upper-right corner of your phone's display.
The presence of all three bars indicates a full
charge, two bars indicates a smaller charge, and
one bar indicates an even smaller charge.
When the battery charge level becomes low, the
battery sensor blinks an empty Battery Status icon
(
) and sounds a warning tone. If the battery level
becomes too low, the phone automatically turns off.
When this happens, you lose whatever you are
doing and if in a call your phone call cuts off. Watch
the Battery Status icon and make sure that your
battery is adequately charged.
Getting started
)
19
Advertisement
Table of Contents
