Summary of Contents for RackSolutions 2UKVM-125-USB-4-17V
- Page 1 RackSolutions .com Patent(s) Pending Rack Mount Monitor Tray with Keyboard with Dell 17" LCD (17V) Installation Instructions Kit P/N: 2UKVM-125-USB-4-17V Kit P/N: 2UKVM-125-PS2-4-17V Technical Support & Sales 903.453.0801 info RackSolutions.com...
- Page 2 Kit Contents (1) Partially Assembled Shelf w/Door Rack Mount Hardware x8 Bag: (2) Rear Brackets 12-24 x 1/2” Pan Head Screws Zinc 10-32 x 1/2” Pan Head Screws (1) Cable Management Bracket 12-24 Cage Nuts (1) Dell 17" LCD (Shipped Separately) 12-24 Square Nuts Rear Hardware Bag: 17V Monitor Hardware Bag:...
- Page 3 Installation Instructions Step 4. Rear Bracket Attachment: Move the slide rails back approximately 10 inches. You may need to loosen the thumb screws to do this. Attach the Rear Rack Brackets and the Cable Arm Extension as shown below. Attach using (4) 8-32 x 3/8” Pan Head Screws and (4) 8-32 Nuts. The screws should be located in the slots as far apart from one another as possible (see below).
- Page 4 Installation Instructions Step 5. Monitor Attachment: Turn the monitor face down on a large flat surface. Locate the four VESA mounting holes on the rear of the monitor. Attach the monitor to the pivot using the hardware shown. The preferred hole locations are marked on the pivot.