V-TEK PC-250+ Quick Start Manual

This quick start guide provides basic setup and operating instructions for the PC-250+. The intended use of the PC-
250+ is to count taped reels of individually sealed components. Use of this equipment in any other way is not
recommended.
Work Area: The PC-250+ is designed to be operated in a temperature-controlled, light industrial setting. The
machine should be installed on a flat, dry, stable surface in a well-lit area. Choose a table that is at least 36" wide by
18" deep to provide sufficient space for the assembled machine.
7
3
6
4
Physical Specifications:
Height: 12 inches (30 cm), Width: 30 inches (76 cm), Depth: 16 inches (40 cm), Weight: 14.5 pounds (6.4 kg)
Power Required: 120/230 VAC, 50-60 Hz, Four AA batteries allow portability
Operating Environment: Operating Temperature: 0°C - 50°C (32°F - 122°F), Maximum Humidity: 90% non-condensing
Detailed User's Guides which include maintenance instructions, spare parts lists and troubleshooting information
are available on the V-TEK, Inc. website:

Contact Information

V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
D291720.1a
PC-250+ Quick Start Guide
5
3
7

Only qualified personnel with the proper technical training, experience working on this
type of equipment and awareness of the possible hazards should perform
maintenance on the PC-250+.

The user is protected from moving parts and exposure to objects being ejected under
pressure by a metal enclosure. The PC-250+ should never be operated with the
enclosure removed. There are no internal parts that can be serviced by the user.

Always connect the power cord to the machine before plugging it into an outlet.
www.vtekusa.com.
TEL: (507) 387-2039
website:
email: service@vtekusa.com
1. AC Power Receptacle
2. Power Switch
3. Pitch Setting Guide
4. LED Display & Controls
5. Tape Adjustment Guide
6. Idler Wheel
7. Reel Arm Cranks
http://www.vtekusa.com
Page 1 of 2
6
5
2
1
Rev. 1, 5/21/17