Acetel MD2000-16H User Manual page 20

Caution for Installation of Product onto Rack
1. To install the product onto the rack, check whether the rack is safe and not damaged before
the installation. Please make sure that the rack is sufficient enough to endure the weight of the
product. This product is designed to be installed onto the 48.26 cm standard rack.
2. To install the product onto the rack, it is recommended to use an open-type rack in order to
prevent the overheating. If a closed-type rack has to be used, a ventilation device must be
installed onto the rack.
3. If only one product is installed onto the rack, the product should be installed onto the lowest
bottom. The rack must be filled from the bottom and the heaviest product should be placed on
the lowest bottom. In case of the rack equipped with a stabilization device, the stabilization
device must be installed onto the rack before loading the product onto the rack.
4. Operation of loading of the product onto the rack or disassembling of the product could have a
risk of falling of the product. Therefore, more than 2 people must work together.
5. To prevent physical damage, the product must be installed onto the lowest bottom of the rack if
only one product is installed onto the rack.
6. If more than one product is installed onto the rack, the heaviest product should be installed on
the lowest bottom.
Copyright 2017 ACETEL Co., Ltd. All Right
Reserved
19
MD2000-16H User Manual
MD2000-16H v1.4