Kanex Premium Tempered Glass Screen Protector Installation Instructions

Installation Instructions
Follow these steps to install your new Kanex Premium
Tempered Glass Screen Protector for iPhone SE / 6 / 6s /
6 Plus / 7 / 7 Plus / 8 / 8 Plus / X.
Preparation and Cleaning:
The first and most important step to a perfect installation.
Choose a clean, well-lit environment
1
with a flat surface.
Wash and dry your hands – Remove
2
dirt and oils.
Clean your screen – Use the provided
3
cleaning wipe to clean o the entire
screen. Then wipe the screen with the
microfiber cloth to remove all lint and
dust. Use the dust removal tape to
eliminate any remaining dust
particles. (DO NOT TOUCH THE
DEVICE SCREEN ONCE IT'S
CLEANED.)
Alignment:
Perfect alignment can be achieved by
following these easy steps.
Hold the sides of the glass with your
4
fingertips so the protective layer is
facing down. Peel o the protective
film labeled Step 1 . Do not touch the
adhesive side once the protective
layer is removed.
Slowly lower the uncovered adhesive
5
side to your screen while carefully
aligning it with the sides, bottom
and home button of your device.
If it does not align perfectly, gently
lift immediately and adjust until
you are satisfied.