1. Manuals
  2. Brands
  3. NI Manuals
  4. Machine Vision Systems
  5. CVS-1459
  6. Getting started manual

NI CVS-1459 Getting Started Manual

Compact vision system with usb3 vision and reconfigurable i/o
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GETTING STARTED GUIDE
NI CVS-1459
Compact Vision System with USB3 Vision and Reconfigurable I/O
The NI CVS-1459 is a compact vision system that acquires, processes, and displays images
from USB3 Vision cameras. The NI CVS-1459 ships with preloaded Windows Embedded
Standard 7 64-bit. This document explains how to install and configure the NI CVS-1459.
Required Components
The following items are necessary to set up and use the NI CVS-1459.
•
NI CVS-1459
•
One or two USB3 Vision cameras
•
One USB 3.0 cable per USB3 Vision camera
•
One CAT 5 10/100Base-TX, CAT 5e, or CAT 6 1000Base-T Ethernet cable to connect the
device to the development computer or to a network.
Note
1,000 Mbps (Gigabit) Ethernet performance. CAT 5e and CAT 6 Ethernet
cables adhere to higher electrical standards required for Gigabit Ethernet
communication. CAT 5 cables are not guaranteed to meet the necessary
requirements. While CAT 5 cables may appear to work at 1,000 Mbps, CAT 5
cables are likely to cause bit errors resulting in degraded network performance.
•
Monitor
•
Keyboard
•
Mouse
•
A compatible power supply, such as the NI PS-15 Power Supply (part number
781093-01)
Optional Equipment
National Instruments offers the following products for use with the NI CVS-1459:
•
24 VDC, 1.25 A Desktop Power Supply (part number 782032-01)
•
44-pin D-SUB cable for digital I/O
–
44-pin D-SUB male to pigtail cable (part number 156083-03 for 3 meter cable)
–
44-pin D-SUB male to 44-position D-SUB female cable (part number 156084-03 for
3 meter cable or part number 156084-0R5 for 0.5 meter cable)
A CAT 5e or CAT 6 1000Base-T Ethernet cable is required to achieve

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CVS-1459 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NI CVS-1459

Summary of Contents for NI CVS-1459

  • Page 1 NI CVS-1459 Compact Vision System with USB3 Vision and Reconfigurable I/O The NI CVS-1459 is a compact vision system that acquires, processes, and displays images from USB3 Vision cameras. The NI CVS-1459 ships with preloaded Windows Embedded Standard 7 64-bit. This document explains how to install and configure the NI CVS-1459.

  • Page 2: Safety Information

    Pollution Degree 2—Normally only nonconductive pollution occurs. Occasionally, nonconductive pollution becomes conductive because of condensation. • Pollution Degree 3—Conductive pollution or dry, nonconductive pollution occurs. Nonconductive pollution becomes conductive because of condensation. 2 | ni.com | NI CVS-1459 Getting Started Guide...

  • Page 3: Electromagnetic Compatibility Guidelines

    To ensure the specified EMC performance, operate this product only with shielded cables and accessories. Configuring the Hardware Remove the NI CVS-1459 from the package and inspect the system for damage. Notify National Instruments if the system appears damaged in any way. Do not use a damaged system.
  • Page 4 Figure 1. NI CVS-1459 Power Connectors and Reset Button 1. Reset Button 3. Isolated Outputs Power Connector 2. System Power Connector 4. Chassis Grounding Screw Figure 2. NI CVS-1459 Front Panel Connectors NI CVS-1459 Compact Vision System RESET 1. VGA Connector 4.

  • Page 5: Connecting The System Power Supply

    0.2 to 0.25 N · m (1.8 to 2.2 lb · in.) of torque. Install the power connector plug into the SYSTEM power receptacle on the NI CVS-1459 chassis and tighten the connector screws to 0.4 N · m (3.5 lb · in.) of torque.

  • Page 6: Connecting The Ni Cvs-1459 To A Network

    IP address (169.254.x.x). Installing NI Vision Acquisition Software Before using the NI CVS-1459, you must install the device drivers onto the device. If you have an external USB DVD drive, you can use the external DVD drive to install Vision Acquisition Software from the DVD shipped with the device.

  • Page 7: Connecting Cameras

    Connect a USB3 Vision cable to a USB3 Vision camera. Connect the other end of the cable to one of the USB3 Vision ports on the NI CVS-1459. Repeat these steps for the other port if you are connecting two cameras.
  • Page 8 Iso Out 1 General purpose isolated output Common ground reference for isolated inputs and outputs Iso Out 4 General purpose isolated output Diff 0- Bidirectional RS-422 I/O (negative side), or quadrature encoder phase A- 8 | ni.com | NI CVS-1459 Getting Started Guide...
  • Page 9 Iso In 5 General purpose isolated input Common ground reference for isolated inputs and outputs Iso In 6 General purpose isolated input Iso In 7 General purpose isolated input NI CVS-1459 Getting Started Guide | © National Instruments | 9...

  • Page 10: Where To Go Next

    NI CVS I/O Accessory. Resources for Vision Builder AI Users Refer to the NI Vision Builder for Automated Inspection Tutorial to learn how to perform basic machine vision techniques using Vision Builder AI. You can access the NI Vision Builder for Automated Inspection Tutorial and other documentation by selecting Start»All Programs»...

  • Page 11: Worldwide Support And Services

    NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. NI also has offices located around the world. For telephone support in the United States, create your service request at ni.com/support...
  • Page 12 . You can find information about end-user license agreements (EULAs) ni.com/patents and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/ for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other legal/export-compliance import/export data.

Table of Contents