Entering Symbols
Symbol mode enables you to enter symbols such as @ or
% into a text message.
1. In standby mode, press the left soft key (
then press
to compose a new text message.
2. Enter the phone number of the recipient, then press
.
3. Press the left soft key (
menu containing the following options.
ABC:
•
Quick Text
•
composed as factory defaults, but all 17 can be edited).
Add Number
•
Send Option
•
options for your message.
Save in Draft
•
Edit Send To
•
Save Text
•
later use.
4. ABC is highlighted. Use the left/right navigation keys to
display Symbol, then press
screens containing symbols appears in the display.
5. Use the navigation left/right keys to page through the
other symbols, if necessary.
6. Enter the key that corresponds with the symbol that you
wish to enter. For example, press
exclamation point (!).
72
(Messages),
Choose the method of text entry.
: Choose from up to 17 messages (11 are pre-
: Add a number from your Phonebook.
: Choose the priority, validity, privacy, and other
: Save the message to your Draft folder.
: Edit the Send To number of your recipient.
: Save the text in your message to Quick Text for
(New Text Msg)
) Option to display a pop-up
. The first of four
for an
) Menu,