Abe CS8042 User Manual

Bluetooth
CS8042
Bluetooth
CS8082

User Manual

Environmental
Http://www.abe-hk.com
1. A/C Adapter and 3 AAA battery...............................................................1
2. Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........1
3. Function Keys......................................................................................1
THREE possible User Scenarios .........................................................................2
I
. Traveller Speaker paired with
profile) Mobile Phone / PDA / MP3 Guide.............
1.Pairing..................... ............ .
2.Listening to music.................
II
. Traveller Speaker paired with Stereo Audio Adaptor CS8082 Guide..... .....4
1.Pairing............................. ...............
2.istening to music......................
III
. Traveller Speaker connected directly with Audio Device Guide................5
1.listening to music..............................................................................5
Accessories Table...............................................................................5
FCC Interference Statement.........................
!
A/C Adapter and 3 AAA battery
Thank you for buying the new BT90S
Bluetooth
CS8082 Stereo Audio Adaptor. You can use the A/C power adapter
(optional, not provided) to power up the CS8042 directly or place 3 AAA dry
batteries into the CS8042 to obtain the power.
!
Turning on / Turning off the Traveller Speaker
To turn on the speaker, please switch the power ON/OFF switch to the "I"
position. To turn it off, please switch the power switch to the "O" position.
!
Function Keys
(Fig.1)
Traveller Speaker
And
Audio Adaptor (optional)
friendly
Index
Bluetooth
enabled (with A2DP and AVRCP
....................
........... .................................................3
.............. ........... .... ................................3
........................................ ..........4
................ ........................................5
............. ..................................6
Bluetooth
Traveller Speaker and, or the
1. Battery cover(Insert 3 AAA batteries).
2. Power ON/OFF switch.
3. DC power input socket(5VDC).
4. Audio input socket.
1
5. Backward switch.(only applied to audio devices supporting A2DP and AVRCP
Profiles)
Bluetooth
6. Volume Down switch.
7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP
Profiles)
Bluetooth
8. ON/OFF/Pairing/Pause switch.
a) When CS8042 is powered on, press and hold (about 2 seconds) until
Bluetooth
LED flashes Green to turn
b) When CS8042 is powered on, press and hold (about 4 seconds) until
Bluetooth
LED flashes Green and Red alternatively to enter into pairing mode.
c) When CS8042 is powered on, press and hold (about 4 seconds) until
Bluetooth
LED turns red to turn
d) Press it once when playing --- Pause
Press it once again --- Resume play
Bluetooth
9. Volume Up switch.
Bluetooth
10. a)
Bluetooth
b)
Pairing mode
Bluetooth
c)
11. Power LED is Blue -- BT90S is Power ON
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and
AVRCP profiles) Mobile Phone / PDA / MP3 Guide
When you purchase a Standalone pack with CS8042 Traveller Speaker only,
please follow this Guide.
.......2
Bluetooth enabled PDA
.
.
1. Pairing
a. While the Speaker is powered off, switch the power ON/OFF switch (Key
2) to the "I" position to turn it on (Fig.1).
become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 8,
Fig.2) for 4 seconds, the
alternatively, which indicates the Speaker in Pairing Mode. The Pairing
Mode will last for one minute.
b. Put the Speaker and the
profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.
c. Follow the operation instructions of your
and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing
process. Typically, this has to be done by going to a setup or connect
menu to discover the Speaker. It may take some time to search it
depending on the number of
d. Your Mobile Phone / PDA / MP3 will display the model name "CS8042 if it
has found the Speaker; and ask for a passkey.
"0000 . After successful pairing, follow the instructions to establish the "
Bluetooth
e. If the pairing is successful, the
indicates it is in Standby Mode and ready to receive audio signals from the
Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the
Traveller Speaker and the audio device off.
repeat the pairing process from the beginning (Fig.4).
2. Listening to music
a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen
to the music from the Speaker.
b. The speaker volume can be adjusted by pressing the VOL Up button
(Fig.2) / VOL Down button (Fig.2).
(Fig.2)
Bluetooth
ON.
Bluetooth
OFF when playing.
(Fig.3)
Bluetooth
LED flashes Green -- is ON
LED flashes Green and Red alternatively --
Bluetooth
LED is red -- will be powered OFF
2
Bluetooth Traveller Speaker
(Fig.4)
Bluetooth
LED will flash red and green
Bluetooth
enabled (with A2DP and AVRCP
Bluetooth
Bluetooth
devices nearby.
connection with the Speaker.
Bluetooth
3
Bluetooth
enters into
Bluetooth mobile phone
The Power LED (Fig.3) will
enabled (with A2DP
"
Enter a sequence of
LED will flash green, which
Wait for 10 seconds and