YOYORouter BE5 Quick Start Manual page 2

BE5 Update double sided:Layout 1 15/12/11 18:01 Page 2
Checking Failover to 3G
1. Check that YOYORouter is normally connected to the Ethernet WAN connection
• System Status shows Ethernet WAN connection details.
• Failover Status shows zeroed IP addresses and blank Connection Time
• Wireless Modem Link Status indicates Disconnected.
Normal (Ethernet) Failover (3G)
2. Unplug the Ethernet cable from the WAN port and check that Failover occurs:
• System Status shows blank Remaining Lease Time and zeroed IP addresses
• Failover Status shows 3G connection information (IP numbers) and Connection Time.
• Wireless Modem Link Status indicates Connected.
3. Re-connect the Ethernet WAN and check that service reverts to the Ethernet WAN connection.