Advertisement
Installation Instructions
Model: HG5421G
Antenna Components Included:
(2) Antenna Grid Section Halves
(1) Antenna Feed Horn
(2) Mast Clamps
(1) Aluminum "L" Bracket
(6) #M5 Machine Screws w/nuts, flat and lock washers
Antenna Assembly Instructions:
Reflector Grid
#M5 Machine Screw
Determine the polarity which will be chosen for the
antenna installation. The antenna can be installed
either vertically or horizontally polarized.
The arrow at the end of the
feed horn indicates the
polarity of the antenna.
The two polarities are
illustrated as shown:
Vertical
Polarity
IP-00053 Rev. D – 02/07 Page 2 of 3
L-com Global Connectivity | 50 High St., West Mill, 3rd floor, Suite #30 | North Andover, MA 01845 | USA
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com Logo are registered marks.
Lock Washer & Nut
Assemble the halves of the Reflector Grid using
(2) #M5 machine screws with lock washers, flat
washers and nuts as shown.
Toll Free Ordering and Technical Support: 1-800-343-1455
Horizontal
Polarity
Advertisement
