Advertisement
Quick Links
MASONRY SAW
(Electric)
O P E RA TING I N S T RU C T I ON S
WARNING
To reduce the risk of injury, all operators and maintenance personnel must read and understand
these instructions before operating, changing accessories, or performing maintenance on this power
equipment. All possible situations cannot be covered in these instructions. However care must be
exercised by everyone using, maintaining or working near this equipment.
Advertisement
Summary of Contents for Parchem F09503
- Page 1 MASONRY SAW (Electric) O P E RA TING I N S T RU C T I ON S WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on this power equipment.
- Page 2 INTRODUCTION CUTTING BLADE Thank you for your selection of equipment supplied by Parchem. A “diamond” blade with diamond impregnated segments on its Should service or spare parts be required, prompt and efficient outer edge should be used.
- Page 3 SAFETY starting the machine. DO NOT stand in line with the blade when starting the machine. KEEP bystanders and animals clear of the NEVER allow any person to operate machine without adequate work area. ENSURE that the material to be cut will remain stable instruction.
-
Page 4: Troubleshooting
Remove the table from the rails or secure it while the machine is in transit. Before storing the machine, spray the blade flanges and fasteners with a rust inhibitor. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Sales Office...