Subscribe to Our Youtube Channel
Related Manuals for Caretec Renaissance
Summary of Contents for Caretec Renaissance
- Page 1 USER MANUAL ________________________________________________________________________________ Renaissance v 1.0.0...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................4 PACKAGE CONTENTS ........................4 DEVICE DESCRIPTION ........................4 KEYS DESCRIPTION ......................4 FIRST STEPS ........................... 5 BATTERY CHARGING ......................5 BATTERY LEVEL INDICATION ..................... 6 OUTPUT SYSTEM .......................... 6 SHOWING NUMBERS ......................6 MULTI-DIGIT NUMBERS ..................... 7 SHOWING SIGNALS ...................... - Page 3 9.2.2 MEDICATION REMINDER RING AND ALARM STATE ..........16 FIRST MEDICATIONREMINDERS GROUP ............... 17 SECOND MEDICATION REMINDERS GROUP ..............17 STOP WATCH APPLICATION ..................... 17 COUNTDOWN TIMER APPLICATION ................18 OPTIONAL: WIRELESS LINK MODE ..................20 10.1 WIRELESS LINK MODE: CHECKING AND ACTIVATING ..........20 10.2 CONNECT WITH AN EXTERNAL DEVICE ..............
-
Page 4: Introduction
Before you continue any further, carefully take your Renaissance out of the box and place it in front of you. The metallic part of the watch should be facing upwards and the side of the watch with 1 false button and 2 regular buttons should be pointing to your right side. -
Page 5: First Steps
To do so use the micro-USB-cable and connect it to a plug socket or to your computer. The Renaissance is set to the date and time in the distributor’s/customer’s time zone. You can also let the software synchronize your watch with your computer by installing the Renaissance sync software and connecting your Renaissance to it via cradle. -
Page 6: Battery Level Indication
Note: You can also check the charging status, while the watch is in the charging cradle. By pressing the key combination Button 2 and Button 4 once briefly. Renaissance will output the signal “Charging started”, if it is still in progress or the signal “Charging finished”, when the charging cycle is complete. -
Page 7: Multi-Digit Numbers
MULTI-DIGIT NUMBERS Renaissance displays, except in Easy Mode, all numbers as double digit values. They are displayed as tens digits followed by a longer pause and then ones digits. If the value is less than 10, the first digit is represented by number 0 (wave signal). -
Page 8: Output Modes
OUTPUT MODE CHECKING AND SETTING To verify which output mode is activated, briefly press the key combination Button 2 and Button 4 twice. Default setting is the combination mode, in that case the Renaissance will announce, that the value is 2 (2 short signals). -
Page 9: Output Mode Speed Checking And Setting
To verify to which value the output speed is set, briefly press key combination Button 2 and Button 4 three times. The default setting of output speed is 3, so in that case Renaissance will tell the value is 3 (3 short signals). -
Page 10: Standard Operation Mode
STANDARD OPERATION MODE Renaissance provides different operation modes the default one is standard mode for the Renaissance. It provides the full range of functions: time display, date display, hourly reminder and the wakeup alarm function. STANDARD MODE ACTIVATION AND CHECKING To check whether standard mode is on just press key combination Button 2 and Button 3 briefly. -
Page 11: Date Indication In Standard Mode
3. Now press Button 1 as many times to increase the tens digits of the value you want to change and Button 2 for the ones digits value. Every tap is confirmed by a “Click”-signal. At the beginning of the setting mode the value of every digit is set to zero. Every time, you push one of the before mentioned buttons you increase the value by 1. -
Page 12: Reading Values And Settings Of Wakeup Alarm
7.4.1 ALARM RING AND ALARM STATUS When the alarm starts ringing, Renaissance enters alarm state. If not canceled or snoozed, the alarm will keep ringing 1 full minute every 5 minutes for the duration of 1 hour and then stop itself. To... -
Page 13: Reading Values And Setting Of Hourly Reminders
These signals are indicating, that you have to turn off the alarm before using any other mode of the Renaissance. READING VALUES AND SETTING OF HOURLY REMINDERS All hourly reminder related information can be requested via Button 4. -
Page 14: Easy Mode Activation And Checking
and the day of the week. Every digit is requested and announced separately. Setting time/date values are not possible in the easy mode. EASY MODE ACTIVATION AND CHECKING To check the Easy mode just briefly press key combination Button 3 and Button 4, you will receive a “ON”-signal when the mode is active or a “OFF”-signal when the mode is switched off. -
Page 15: Application Mode Checking And Setting
APPLICATION MODE CHECKING AND SETTING To check whether the application mode is active, briefly press the key combination Button 1 and Button 2. Renaissance will announce the status by outputting the “OFF”-signal (1 wave signal) or by the number of the active application:... -
Page 16: Reading Values And Settings Of Medication Reminder
Confirmation signal 9.2.2 MEDICATION REMINDER RING AND ALARM STATE When medication reminder starts ringing, Renaissance is put into a medication reminder state. If not canceled, the medication reminder will keep ringing for 4 seconds during 1 full minute every 2... -
Page 17: First Medicationreminders Group
canceled. To cancel the medication reminder, briefly press the key combination Button 1 and Button 3. Medication reminders have no snooze function. FIRST MEDICATIONREMINDERS GROUP This group contains the medication reminders 1 to 4. They are assigned to these buttons: Medication reminder 1 - Button 1 Medication reminder 2 -... -
Page 18: Countdown Timer Application
Once - to indicate the shortest lap hours (double digit output [0 – 23]) Twice - to indicate the shortest lap minutes (double digit output [0 – 59]) Three times - to indicate the shortest lap seconds (double digit output [0 – 59]) Press and hold Button 3 to clear the shortest lap time. - Page 19 By default the initial value of the time interval (managed by Button 2) is set to 00:01:00, but the watch will always keep the last time value set by you, once it is changed to a value different than any preset value.
-
Page 20: Optional: Wireless Link Mode
The wireless link mode enables Renaissance to connect with other devices and receive information. This mode is only available with Renaissance Plus! A model of Renaissance without wireless link will give you an “Error”-signal, if you try to activate that mode. -
Page 21: Connect With An External Device
3. A series of short signals starts to announce the search of a capable device. 4. If no device can be found Renaissance will emit the “NO”-signal and will return to the mode set before. If at least one device is found Renaissance tries to connect with that device, during that trial a series of short dual signals are emitted. - Page 22 1) Make sure that the Renaissance battery level is at least 10%. Also the battery of Heidi should not be very low or empty, alternatively use the power supply to power the scale. 2) Put the empty scale on a flat surface and turn it on. After the scale announces “Ready”, turn on the wireless module by pressing the key combination “+”...
-
Page 23: Scale Happy Day With Integrated Wireless Mode
Renaissance gives you a “NO”-signal to inform you that the wireless link is no longer active. Also if you switch to another mode with your Renaissance the wireless link will be cut off. Activating the wireless mode when it is already active or even when the connection is established, will result in closing any active connection and completely resetting the wireless mode. -
Page 24: Deactivating Of The Wireless Link Mode
Others are single digit values like the mode of the alarm clock. And some other settings just can be requested like the charging status or the day of the week. Every mode of the Renaissance has its own key combination for requesting status or activation. Settings of seconds just can be set to 0. -
Page 25: Returning Settings To Default Values
To perform reset press this key sequence. Briefly press (Button 1) | briefly press (Button 2) | briefly press (Button 3) | briefly press (Button 4) For resetting the Renaissance into the software update mode, user have to enter a slightly different key sequence:... -
Page 26: Troubleshooting
13. SAFETY AND CLEANING To ensure the safe use and a long service life of the Renaissance, please keep in mind the following information: The watch should not be opened. It is specially assembled to ensure safe operation and water resistance. -
Page 27: Technical Data
In case of problems please contact CareTec or your local distributor before returning the device without any apparent reason. We will then inform you about the necessary procedures. -
Page 28: Legal Notice On The Disposal Of Electronic Devices
16. LEGAL NOTICE ON THE DISPOSAL OF ELECTRONIC DEVICES 16.1 DISPOSAL OF USED ELECTRONIC DEVICES This product must be disposed of separately from household waste at specially designated collection and recycling points. For further information, please contact your local authorities. 16.2 BATTERY DISPOSAL Batteries must not be disposed together with household waste. -
Page 30: Manufacturer
18. MANUFACTURER CareTec International GmbH Stubenbastei 1 A 1010 Vienna, Austria Is the manufacturer of this product. Phone: (+43 1) 513 80 81 0 Fax: (+43 1) 513 80 81 9 Email: office@caretec.at Web: www.caretec.at Renaissance_BA_EN_062016_V5.8...
Need help?
Do you have a question about the Renaissance and is the answer not in the manual?
Questions and answers