Advertisement
Figure 4
1. Axle assembly
Mount Wheel Assemblies
1. Mount a wheel assembly to each axle hub with (4) lug
nuts (Fig. 5). Tighten nut to 80 ft/lb.
2. Inflate tires to 5 psi.
1
2
Figure 5
1. Axle
Important
Higher tire pressure may cause damage
to greensmower.
2
1
2. Rail assembly (R.H.)
2. Wheel assembly
Mount/Adjust Hitch Straps
Hitch straps are shipped mounted in the standard position
(Fig. 6).
Important
Trailer tongue to be parallel to ground when
aligned with tow vehicle hitch.
Figure 6
1. Standard position
1. Using one of the configurations in figure 7 or 8, adjust
and secure hitch straps to trailer tongue.
Figure 7
1. Low hitch position
Figure 8
1. High hitch position
2
2.
Advertisement
