Advertisement
Available languages
Available languages
Table of Contents
Instruction Sheet
CAUTION!
Before working on trolling motor, be sure that the battery
cables are not connected to the battery.
Instructions:
1. Insert handle into the opening of the trolling motor head as shown in Figure 1. Press firmly until there is no
gap between the trolling motor head and the black portion of the handle.
2. Rotate handle in both directions to ensure that the maximum speed indicator for forward and reverse align
with the rotational stop.
3. Extend the handle and pull firmly to ensure that it is
properly locked in place.
Note: Handle installation is permanent. Do not attempt to
remove the handle.
© 2014, MotorGuide
For questions, contact Consumer Affairs at 1-920-929-5040
www.motorguide.com
R3 / X3 Handle
Installation
R3 / X3 Series
Figure 1
69543 Rev A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MotorGuide R3 Series
Summary of Contents for MotorGuide R3 Series
- Page 1 3. Extend the handle and pull firmly to ensure that it is properly locked in place. Note: Handle installation is permanent. Do not attempt to remove the handle. © 2014, MotorGuide For questions, contact Consumer Affairs at 1-920-929-5040 69543 Rev A www.motorguide.com...
- Page 2 3. Dépliez la poignée et tirez fermement pour s’assurer qu’elle est bien verrouillée en place. Remarque: l’installation de la poignée est permanente. Ne tentez pas de retirer la poignée. © 2014, MotorGuide Pour toute question, communiquez avec le service à la clientèle au 1-920-929-5040 69543 Rev A...
Need help?
Do you have a question about the R3 Series and is the answer not in the manual?
Questions and answers