Download Print this page

Viking VK3010 Instructions

10w ip65 quadpar

Advertisement

Quick Links

Viking VK3010
10w Quadpar
Operation
Menu
The Menu On Off Function allows you to expand the Menu
Options for advance mode. When set OFF you can only set the
DMX address
To set press Enter while MENU is displayed followed by the
up/down buttons to select either ON or OFF followed by ENTER
to confirm
Auto operation
Press the Menu button until it shows one of :
FLAS - Strobe
FADE - Fade in and Out
ACC - Auto Colour Change
Then Press Save button and the last 2 digits in the display will show 00-12
indicating the speed of the effect - press up/down to select speed and save to exit
Music Operation
Press the Menu button until it shows one of :
SouF - Music Program 1
SouD - Music Program 2
press up/down to select program and save to exit
Manual Operation
Press the Menu button until it shows one of :
C1 - Red
C2 - Green
C3 - Blue
C4 - White
press up/down to select colour and save, the last 2 digits in the display will then
show 00-12 for the dimmer level of 1-12 - use up/down to select brightness and
save to exit
VK3610W
IP65 Quadpar
DMX Operation
DMX Address
Press the menu button until it shows AXXX in the Display where
XXX is the current DMX address. Press u[p/down button to alter
the address and save to store or Menu to exit
DMX Mode
This unit has 3 DMX modes - MOD1 MOD2 MOD3
Press Menu button until it shows MODX where X is the current
Mode. Press up/down to alter mode number and Save to save or
Menu to exit.
Reset
The unit will remember the settings of the program, colours and
DMX mode when unplugged. Press Menu button until rSET
appears in display then press save and the unit will reset to default
power on settings ie; all colours off and DMX Mode 3
DMX Mode 1
1
0-255
Master Dimmer
2
0-255
Colour Macro
3
0-255
White Dimmer
DMX Mode 2
1
0-255
Master Dimmer
2
0-255
Red Dimmer
3
0-255
Green Dimmer
4
0-255
Blue Dimmer
5
0-255
White Dimmer
DMX Mode 3
1
0-255
Master Dimmer
2
0-255
Red Dimmer
3
0-255
Green Dimmer
4
0-255
Blue Dimmer
5
0-255
Strobe for RGB
6
0-255
Rainbow of colours Snap & Speed
7
0-255
Rainbow of colours Fade & Speed
8
0-255
Colour Macro
9
0-255
White Dimmer
10
0-255
Strobe for White
M74

Advertisement

loading

Summary of Contents for Viking VK3010

  • Page 1 Viking VK3010 VK3610W DMX Operation DMX Address 10w Quadpar IP65 Quadpar Press the menu button until it shows AXXX in the Display where XXX is the current DMX address. Press u[p/down button to alter the address and save to store or Menu to exit...
  • Page 2 Master / Salve and start transmitting data causing other equipment in the chain to misbehave. This will stop once DMX is connected and heads are all set to DMX mode and addressed correctly. Rotatable Barndoors and colour frames are available as an extra for the VK3010 only...

This manual is also suitable for:

Vk3610w