Samsung Muse User Manual page 45

Service.
"Say a Command" appears in the display and is
pronounced through the speaker.
Say "Lookup".
2.
VoiceSignal prompts you to "Say the name or #."
Speak clearly and say the full name of the person you want
3.
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with "Did you say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next
4.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Choice Lists" on
page 104.)
• To say the name again, press the Repeat (right) soft (
• To exit VoiceSignal without dialing, press the Settings (left) soft
( ) key, then press the Exit (right) soft (
The contact information for the name you selected appears
5.
in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
Example: If you saved a contact name as "Amy Smith", begin your search for
Note: As you enter letters, the entry names of the closest matches (thus far)
) key.
).
1. In standby mode, do one of the following:
• Press the Down navigation key (Contacts Find shortcut).
• Press the MENU key (
for Find.
The FIND screen appears in the display with an
alphabetical list of Contacts showing.
Enter the first few characters of the name of the contact as
2.
it appears in your Contacts list.
that contact by pressing
appear in the display.
When the desired Contacts entry is listed in the display,
3.
highlight the contact using the navigation keys (if
necessary). Then, do one of the following
), then press (for Contacts) and
for "A".
Understanding Your Contacts 42