I. INTRODUCTION The Nano SPY is a digital probe pe capable of measuring 1 or 2 physical quantities (T or TH depending on the model) and transmitting by radio to monitoring software hosted on a Web platform through a Nano Link.
For installations outside the enclosure, mount the units sufficiently high on the walls to avoid interference with obstacles and foot traffic. Insofar as is possible, place the Nano SPY LINK in a central position relative to the measurement points.
IV. USE The Nano SPY can only be used with the My Sirius software hosted on a Web platform and with a Nano SPY Link. See MySirius online help for Nano Spy configuration. Off state As delivered, the Nano SPY is turned off. It can neither emit nor receive signals.
Put the new battery in place respecting the polarity KEEP THE BATTERY AWAY FROM FIRE; DO NOT ATTEMPT TO RECHARGE OR SHORT-CIRCUIT IT ONLY USE BATTERIES* SUPPLIED BY JRI (REF : 11596) *Recommended batteries: Saft LS14500 type AA 3.6V 2250mAh VI. MAINTENANCE Clean the device with a soft cloth, either dry or slightly moistened with water.
The use of radiofrequency thus requires periodic monitoring by recognized specialists. It is for this reason that JRI has developed for you the maintenance contract. We simplify your procedures by offering you a fully-integrated solution. This global service offer includes both maintenance and a metrological service, ensuring the optimum functioning of your devices or of your installation.
Need help?
Do you have a question about the Nano SPY and is the answer not in the manual?
Questions and answers