Advertisement
Remote Control Operation:
To program the wireless remote:
1. Power off the spotlight. Ensure there is no transmitter operating within 10 feet.
2. Power on the spotlight, then press the ▲ and down ▼ buttons on the remote at the same time. To program a second remote, press the
up ▲ and down ▼ buttons on the second remote within five seconds.
3. The spotlight will flash when the remote has been successfully programmed.
Joystick Control Operation:
ON/OFF
BUTTON
ON/OFF TOGGLE
SWITCH
LIGHT BEAM
DIRECTION OPERATION
EW300X: STROBE ON/OFF
EW301X: SPEED FAST/SLOW
SPEED
TOGGLE
SWITCH
LIGHT BEAM
DIRECTION
SWITCH
Page 3 of 4
Advertisement
