LG 42PC5R Service Manual page 16

www.freeservicemanuals.info
2. Protect mode
(1) Symptom
1) After once shining, it does not discharge minutely from module.
2) The relay falls.(The sound is audible "Click".)
3) It is converted with the color where the front LED is red from green.
(2) Check following
Is the Power Board
normal ?
Yes
Is the each
connector normal?
Yes
Is the Y-Board
normal?
Yes
Is the Z-Board
normal?
Yes
Is the X- Board
normal?
No
Is output the normality Low/High
voltage except Stand-by 5V?
No
After connecting well each connector,
the normality it operates?
Is the fuse
No
(FS2,FS3) on Y-B/D
normal?
Yes
Is the fuse
No
(FS1,FS2) on Z-B/D
normal?
Yes
Is the
output voltage
No
normal after remove P1, 2,
3, 4, 5 connector of
X-B/D?
Digitized in Heiloo the Netherlands
No
Replace Power Board.
No
Replace the connector.
Is the output voltage
No
normal after remove P1
connector of Y-B/D?
Replace the fuse.
Is the output voltage
No
normal after remove P1
connector of Z-B/D?
Replace the fuse.
After remove P1, P2, P3 output voltage
normality: Replace Right X-B/D
After remove P4, P5 output voltage
normality: Replace Left X-B/D
- 16 -
4/17/2018
Replace Y-Board.
Replace Z-Board.
Not for sale!