Page 1
OPERATOR'S MANUAL Cat. No. M18™ FUEL™ MUD MIXER WITH 0° HANDLE WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • If devices are provided for the connection of dust extraction and collection facilities, ensure these are SAFETY WARNINGS connected and properly used. Use of dust collection Read all safety warnings, instruc- WARNING tions, illustrations and specifica- tions provided with this power tool.
No Load Revolutions per Minute (RPM) Adjusting the Side Handle SPECIFICATIONS 1. Unlock auxiliary handle by lifting the handle lock. Cat. No.............M18 FPM 2. Rotate the auxiliary handle to Volts.............. 18 DC desired location. Unlock No Load RPM ..........0 - 550 3.
Locking Trigger WARNING recommended for this tool. Others The lock button holds the trigger in the ON position may be hazardous. for continuous full speed use. 1. To lock the trigger, hold the lock button in while OPERATION pulling the trigger. Release the trigger. Using the Control Switch 2.
MILWAUKEE If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on...
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...