Steam2Care BT-502 User Manual

BT-502
Electronic Threading Hair Removal
USER MANUAL
Thank You
for Choosing
BT-502
Electronic Threading Hair Removal Device
Threading (epilation) is an ancient method of hair removal that
e ectively removes unwanted facial hair and shapes eyebrow
and upper lip fuzz. It utilizes the concept of twisting cotton
thread to pull hair out at follicle, which allows it to last up to
six weeks before next threading. Frequent threading can also
damage hair follicle, stopping hair growth permanently.
Threading provides more precise control and is gentler on the
skin as opposed to waxing.
Traditional threading requires a skilled technician to perform.
Our BT-502 Electronic Threading Hair Removal Device makes it
easier and much more convenient to do it yourself. With some
practice of your own, you can gain the same results as experts.
In addition to facial hair removal, this BT-502 device is also great
for removing body hair.
We hope you will enjoy using this product. For any question
or comment about the product, please feel free to contact us at
www.steam2care.com

Package Content

BT-502 Electronic Threading device x 1
AC Adaptor (for charging) x 1
Rechargeable Batteries (installed) x 2
Cotton Thread Roll x 1
User Manual x 1

Charging the device

The package comes with two AA size rechargeable batteries
already installed to the device. It may be necessary to charge
these rechargeable batteries before initial use. To charge the
rechargeable batteries, simply plug in the cord of the supplied
AC adaptor to the bottom of BT-502 threading device. The
charge indicator should turn ON to indicate that charging is
in progress.
Depending on the batteries' power level, it could take up to
several hours to fully charge the rechargeable batteries.
BT-502 threading device can also operate on two regular
alkaline AA batteries. However, please note that regular alkaline
batteries are not rechargeable, and the device should never be
plugged into the AC adaptor when alkaline batteries are used.

Setup Instruction (Step 1)

Central Thread Loop
Cut a piece of cotton thread approximately 14 inch long,
thread it through the Central Thread Loop, located on the top
of the BT-502 threading device.