COP Security 15-PS084 User Manual

8 port 10/100Mbps
with 4 Port PoE Switch
User's Manual

Package Contents

Before you start to install this switch, please verify your package
that contains the following items:
One PoE Switch
One adapter
One Power Cord
One User's Manual
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.

FCC Warning

This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates and radiates radio frequency energy and, if not
installed and used in accordance with the user's manual, it
may cause interference in which case users will be required
to correct interference at their own expenses.

CE Warning

This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.

Introduction

This switch provides 8 10/100M ports. It was designed for
easy installation and high performance in an environment
where traffic is on the network and the number of users
increases continuously.
The compact rigid desktop size was specifically designed for
small to medium workgroups. It can be installed where space
is limited; moreover, it provides smooth network migration
and easy upgrade to network capacity.

Product Features

Providing 8 Port s of 10/100Mbps TX switching ports
Complying with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX,
Supporting the flow control: back pressure for Half-duplex
and IEEE 802.3x for Full-duplex mode
All ports support Auto-MDIX function
Being dedicated 2000Mbps Full-duplex bandwidth to the
each port
Broadcast storm control and supporting store & forward
operation
Non-blocking & Non-head-of-line blocking full-wire speed
forwarding
Auto-learning networking configurations
Built-in 1024 MAC learning table, 96K byte buffer memory
Filtering/Forwarding Rate:
100Mbps/148,800pps;10Mbps/14,880pps
Supports packet length 1522 bytes/ Maximum 1536 bytes
Jumbo frames: 9K
Status LEDs: System Power, 10/100M Link/Activity and
PoE/PSE on line
Network Transmission Media: 10Base-T Cat. 3, 4, 5
UTP/STP; 100Base-TX Cat. 5 UTP/STP
External Power supply: DC 48V input
Operating Temperature: 0℃ ~ 60℃
Storing Temperature: -20℃ ~ 40℃
Humidity: 10% ~90% RH (Non-condensing)
Dimension (L x W x H): 141mm x 94 mm x 31mm
Total Power Supply : 65Watt
Weight: 371g
Safety & EMI Certificates: CE & FCC
Smart plug & play