Summary of Contents for A-Plus Water Duraline series
- Page 2 Description of Parts and Application Installation Instructions Installation Diagram Part Numbers and Descriptions 9-10 Iron Removal Complete System Contact Information...
- Page 3 The In/Out Air Release Fitting (R00019) comes pre-assembled into the In/Out Head (R0005). Attach the Air Release System (R00018) to the hose barb. Refer to Installation Instructions #2, page 7. Refer to Figure 2.
- Page 4 The Monitor PCB & Enclosure Transformer (R0003) come pre-assembled and fixed to the Connection Manifold (R0001) to create the Electronic Manifold Assembly (R00020). The Spool Adapter with Check Valve (R0006) is installed on the inlet side of the Connection Manifold (R0001) with the Monitor Meter (R0002) attached.
- Page 5 Two Sample Taps (R0008-2) and one Elbow with Check Valve (R0008-10) are included in the kit and will need to be taped and attached to the connection manifold (R0001). See Figure 2C. If you are not using the sample taps, be sure to tape and attach the enclosed plugs instead.
- Page 6 The F11-FTC Valve is mounted to the filter media tank. This media purifies the oxidized water. The Air Pump (R00010) connects with ¼” tubing that uses a quick release fitting on the pump and is routed to the Elbow with Check Valve (R0008-10). Refer to page 4 Figure 2c. The Air Pump Bracket (R0009) is a stainless steel bracket that provides convenient means to permanently install the pump.
- Page 7 The convenient Bypass Manifold (R0004) is designed as a solder free installation that can be used with quick release fittings and our standard bypass valve (1606P).This allows for minimal water usage during the installation of the Iron Kit. (John Guest fittings are optional) Standard Bypass Manifold Assembly with optional John Guest fittings Optional Stainless Steel Bypass Assembly...
- Page 8 Iron Removal Setup… Installation by a certified water treatment professional is highly recommended. 1. Remove distributor tube and basket from empty tank and remove the wrapping from the basket. 2. Attach tubing from the air release system (R00018) to the hose barb (R00019) in the in/out head (R0005).
- Page 10 R0003-MONITOR PCB AND ENCLOSURE TRANSFORMER PART # DESCRIPTION R0002 MONITOR METER R00012 BASE R00013 COVER R00014 STEREO CORD 79869 TRANSFORMER R00016 R00017 DECAL 0001-027-308 SMALL SCREW 102105H LARGE SCREW R0004-BYPASS MANIFOLD ASSEMBLY PART # DESCRIPTION BYPASS MANIFOLD R0007 SPOOL ADAPTER 116018HB 3/4"...
-
Page 11: Optional Components
R0008-IRON REMOVAL KIT PART # DESCRIPTION 1606P PLASTIC BYPASS VALVE F11-FTC STANDARD FILTER VALVE R0004 BYPASS MANIFOLD R0005 IN/OUT HEAD R0006 SPOOL CHECK VALVE ASSEMBLY R0008-2 R0008-10 ELBOW with CHECK VALVE R0009 AIR PUMP BRACKET R00010 AIR PUMP R00018* AIR RELEASE SYSTEM R00019* IN/OUT AIR RELEASE FITTING R00020*... - Page 12 Fully Automatic Self-Cleaning Backwash Service Flow of 7 GPM Working pH: 6.8-9 Removes: Clear Iron up to 15 ppm Red Iron up to 8 ppm Manganese up to 2 ppm Sulfides (Sulfur) up to 4 ppm Air Injection Oxidation Aeration injects dissolved oxygen to convert the iron and manganese from their ferrous and manganous forms to their insoluble form.
- Page 13 Thank you for choosing this Iron Removal system for your water treatment. Please contact your service professional with questions. Place contact information here.