1. Manuals
  2. Brands
  3. Iron logic Manuals
  4. Other
  5. Z-2 RF-1996
  6. User manual

Iron logic Z-2 RF-1996 User Manual

Desktop rfid reader/writer/communicator 125khz for ironlogic rfid locks
Hide thumbs
1
2
3
Table of Contents

Advertisement

Quick Links

Download this manual
Z-2 RF-1996
Desktop RFID reader/writer/communicator 125KHz
for IronLogic RFID locks maintenance

1. OVERVIEW

Desktop RFID reader
1) Acquiring the serial numbers from EM-Marine and Atmel T5557 (Temic) contactless tokens
(tokens, key fobs etc.) and transferring them into PCs via USB interface.
2) Writing information into protected memory blocks of Atmel T5557 (Temic) cards.
Accessing memory of Z-series locks with access control function (
Eurolock
, Z-9, Z-Eurolock etc.) including writing and reading information about tokens (cards)
serial numbers, downloading events, setting clocks and parameters and updating the locks
firmware.
2

. FEATURES

Automatic detection of token standards.
Can be used in servicing Z-series locks with access control function (see www.ironlogic.
details).
For lock servicing, "Lock's Commander" and "Lock's Manager" software are recommended
(see www.ironlogic.
Powering and management is done via USB, therefore standalone operation is not possible.
Users can upgrade the firmware.
3

. CONNECTION

Connect the
reader
Install the drivers from a supplied disk.
Z-2 RF-1996
User Manual
Z-2 RF-1996, referred to further as "Adapter", is used for:
me
).
to an available USB port on the PC, via supplied USB A/B cable.
80
www.ironlogic.me
all Z-series locks and
25
me
for
page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-2 RF-1996 and is the answer not in the manual?

Questions and answers

Summary of Contents for Iron logic Z-2 RF-1996

  • Page 1 1. OVERVIEW Desktop RFID reader Z-2 RF-1996, referred to further as “Adapter”, is used for: 1) Acquiring the serial numbers from EM-Marine and Atmel T5557 (Temic) contactless tokens (tokens, key fobs etc.) and transferring them into PCs via USB interface.
  • Page 2 Z-2 RF-1996 www.ironlogic.me 4. OPERATION. After the drivers are installed, a new virtual COM port will be detected on the PC, through which the information will be exchanged with that PC. When working properly, reader 's LED shines red, indicating that it is powered on.
  • Page 3 Z-2 RF-1996 www.ironlogic.me 7. OPERATIONAL CONDITIONS Recommended air temperature: 5…40°C. Humidity: ≤ 80% at 25°C. If operational conditions are differing from described above, device specifications can deviate from specified values. The controller is to be operated in absence of: precipitation, direct sunlight, sand, dust, water condensation.

Table of Contents