Download Print this page

Afinia 3D ES360 Quick Start Manual

Advertisement

Quick Links

Put the box on a stable surface, cut the tape and open the box.
Remove the inner box and open. Pull foam carefully from inner box
and pull foams apart. Carefully take out scanner and turntable; set
spare parts aside for now.
Adjust the angle of the scanner so the lower edge of the projec on
approaches the second loop of the turntable; ghten the scanner
mount bolt.
ES360 QUICK START GUIDE
www.afinia.com
Assemble the frame for the Calibra on Board as shown in the image
above, then slide the calibra on board into the frame.
NOTE: During calibra on, the frame should not be moved - rotate the
calibra on board instead.
Set the turntable and scanner in the outlines on the posi oning sheet.
Grooves
should be open
at the top
Support Webpage:
afinia.com/support
For Email Support:
support@afinia.com
For Phone Support:
USA (M-F 8-5 CT):
952.279.2643
UK: +44 (0)845 230 7800
Japan:
03-3561-2266
Plug the power cable, VGA cable, and USB cable into the specified
connec ons on the scanner and turntable. Plug the other ends of
the cables into the computer and outlet. Turn on the scanner by
pressing the power bu on twice.
NOTE: The scanner USB cable can only be connected to the PC using
a USB 2.0 port.
360
To register your scanner and download the installer, go to
h p://www.3dker.com/en and create an account. Select the Afinia
3D scanner model and enter your Serial Number to begin the down-
load.
A USB s ck with the so ware installer is also included with your
scanner.

Advertisement

loading
Need help?

Need help?

Do you have a question about the ES360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Afinia 3D ES360

  • Page 1 ES360 QUICK START GUIDE Support Webpage: afinia.com/support For Email Support: support@afinia.com For Phone Support: USA (M-F 8-5 CT): 952.279.2643 UK: +44 (0)845 230 7800 www.afinia.com Japan: 03-3561-2266 Plug the power cable, VGA cable, and USB cable into the specified connec ons on the scanner and turntable. Plug the other ends of Set the turntable and scanner in the outlines on the posi oning sheet.
  • Page 2 ES360 QUICK START GUIDE Support Webpage: afinia.com/support For Email Support: support@afinia.com For Phone Support: USA (M-F 8-5 CT): 952.279.2643 UK: +44 (0)845 230 7800 www.afinia.com Japan: 03-3561-2266 Run Afinia 3D EINSCAN-S software Run Afinia 3D EINSCAN-S software Before your first scan, or if you move, reposi on, or drop your scanner, you should r-un the calibra on process.