Advertisement
CONTENTS
Section Details
1
BEFORE YOU START... IMPORTANT INFORMATION
2
3
4
5
SPARE PARTS LIST
6
7
8
1 / BEFORE YOU START - IMPORTANT INFORMATION
Warning: Incorrect use of this product may cause serious injury.
a. All users of this helmet should read & understand this manual before using the
product
b. Use this helmet only for the intended application as described in this manual
c. Each time the helmet is used, it should be checked for correct operation: Use a ciga-
rette lighter or strong light source to check that the lens is activating correctly.
d. Stop welding immediately if the helmet filter/lens fails to darken when the arc
is struck. Do not continue use until the malfunction has been rectified. Read this
manual for further information and if in doubt, return the helmet to your Weldclass
distributor for further inspection.
e. This welding helmet does NOT provide unlimited protection. All appropriate PPE
and safety-wear must be worn, and safe work practices must be followed at all times,
in accordance with applicable industry OH&S regulations. Arc rays can burn eyes and
skin. Fumes and Gases can be hazardous. Noise can damage hearing. Flying particles
can cause impact injury or death.
f. Never use the helmet without the outer & inner cover lenses correctly installed.
Failure to do so will damage the Auto-darkening filter & void warranty.
Always keep clear cover lenses clean and replace them regularly. Dirty or scratched
cover lenses may cause the auto-darkening filter to malfunction.
Hide quick links:
Advertisement
