CEL POWERhandle User Manual

Technical Specifications

Product Code - PHFC1
Charger Input - 110/240v AC 50/60Hz
Charger Output - 23V DC 2000mA
Boxed Dimensions - 353x266x95mm
- approx (14x10x4")
Weight - 0.45Kg (1lb)
Currently compatible with - PH01, PH02, PH03, PH04,
PH10, PH11
xxxxxx
If you experience any problems with this product please contact
email: service@cel-global.com
phone UK: +44 (0) 8453 889769
phone US: +1 800 233 7592
www.cel-global.com
GENERAL HAZARD
KEEP DRY
SAFETY ALERT
READ INSTRUCTION MANUAL KEEP BYSTANDERS AWAY
C Enterprise Ltd
C Enterprise Limited www.cel-global.com info@cel-global.com
UK • HK • USA • China • Europe • Australia • Japan
© Copyright C Enterprise Limited 2011
Manual Version: 110316 - Designed and edited in the UK - Printed in China

FAQ

My battery is not charging, what's wrong?
Check to make sure the electrical outlet is live and that
the air surrounding the battery and charger is between
10ºC and 24ºC (50ºF) and (75ºF). Make sure the
POWERhandle is correctly fitted.
If a Li-ion battery has been subject to an impact, such as being
dropped, the circuit which prevents over discharge can become
damaged, contact your retailer. Extreme impact can cause the
chemicals within the battery to leak, these chemicals are
harmful and should not be touched. Do not charge or attempt to
use the battery. Dispose of appropriately.
Which POWERhandles can I charge with this charger?
See Technical Specifications section, check with your supplier if
unsure.
What is the best way to care for the batteries in my
POWERhandle?
CEL uses several types of battery in its range of
POWERhandles, these require different care. NiCD batteries
will perform best if completely discharged before charging, at
least once every five cycles (charge/discharge cycles). NiMh
batteries should be cared for in a similar way but are more
resilient to the "memory effect" than NiCD, Li-ion batteries have
no memory effect so you can charge them at any time. The
charge will be retained in storage for much longer than other
battery technology but should be topped up occasionally as
over discharge can permanently damage the battery. For more
information see www.cel-global.com
How can I get my charger repaired if it is damaged?
Contact your retailer or visit www.cel-global.com
Where can I get replacement parts, advice or help?
Ask at your retailer or visit www.cel-global.com

Maintenance

POWERhandle refers to the battery pack and handle used to
power compatible CEL products, use of the word battery or
batteries refers to the non-removable cells contained within the
POWERhandle.
General inspection
Regularly check that all wires and fittings are present and
correct. Any damage increases the risk of electric shock, fire or
damage to person and property.
Dust
Keep the products air vents unclogged and clean at all
times. Remove dust and dirt regularly. Cleaning is best
done with compressed air or a rag.
Never use caustic agents to clean plastic parts.
CAUTION, Do not use cleaning agents to clean the plastic
parts of this product. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the charger or POWERhandle.
WARNING, Do not use an extension cord to charge.
WARNING, Charge indoors only.
WARNING, Do not use in wet or damp areas.
Store the product, instruction manual and accessories in a
secure, dry place. In this way you will always have all the
information and parts ready to hand.
This product contains no user serviceable parts. Repairs should
only be carried out by a CEL authorised repairer.
Error codes:
E1: Charging failure for Li-ion POWERhandle
E2: Communication failure for Li-ion POWERhandle
E3: Charging failure of NI/MH-CD POWERhandle
E4: Contact error or open circuit, re-insert POWERhandle.
POWERhandle
Fast Charger
User Manual
18V
PHFC