• To say the name again, press the Repeat soft key.
• To exit Voice Dial without dialing, press
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains (two-second) T pause(s) simply
•
wait for the pauses to pass and the dialing to complete.
If you voice dial a contact that contains (hard) P pause(s), wait for the
•
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
A ring tone sounds and/or your phone vibrates (Your phone provides
•
seven ring volume settings including: Ringer Off,
Medium, Medium, Medium/High, High, or Vibrate/High, and/or
different ring types to distinguish callers.)
A phone number (unless blocked by the caller) and a name appear in
•
the display (If the caller's number and name are stored in your
Contacts list).
If the caller can't be identified, Call from unavailable#, Call from
•
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
•
events occurs:
– You answer the call.
– You ignore the call.
23
.
Answering an Incoming Call
Tip: You can set your phone to automatically
Vibrate
Low
Low/
,
,
The In-Use Options Menu
Note: If the call is disconnected while you are accessing the In-Use Option,
– The calling party ends the call.
– The call is sent to voicemail.
Open the flip on your phone, if
closed, and/or press
tone and/or vibration stop and the
caller's voice can be heard in the
earpiece.
answer calls or to answer calls when you press
any key but the
key or automatically, as indicated by the Auto
Answer icon (
). (For more information, refer to "Call Settings" on
page 104.)
You can access numerous menus and features while in a call.
the In-Use Option disappears from the display and the phone
eventually returns to standby mode.
While in a call, press the Options soft key.
1.
. The ring