Download Print this page

Adam PMB Manual

Temperature calibration kit

Advertisement

Quick Links

PMB TEMPERATURE CALIBRATION KIT
Part Number 3.07.6.6.10650, Revision E, Feb 2015
PMB TEMPERATURE CALIBRATION KIT
The temperature probe Serial No. AE xxxxx included in this kit has been calibrated to
an accuracy of +/- 1ºC
The Temperature measuring range is from -50ºC to 300ºC
Display resolution is 0.1ºC
Power is 1.5v DC LR44 button-cell type battery
Operating Instructions
ON/OFF: Press this button to power the probe up and down
ºC/ºF: Press this button to alternate between ºC and ºF
Temperature Calibration
1. Place a sample pan on the pan support during this test.
2. Place the temperature probe to be used to monitor the temperature within the
weighing chamber on or near the sample pan.
Adam Equipment – Scales and Balances
Adam Equipment
Registered No: 1309669 (England)
UK USA South Africa

Advertisement

loading

Summary of Contents for Adam PMB

  • Page 1 1. Place a sample pan on the pan support during this test. 2. Place the temperature probe to be used to monitor the temperature within the weighing chamber on or near the sample pan. Adam Equipment – Scales and Balances UK USA South Africa Registered No: 1309669 (England)
  • Page 2 Enter this value as before pressing [Setup/Enter] to confirm and store the value. SEC TEMP The PMB will now return to normal weighing. Adam Equipment – Scales and Balances UK USA South Africa Registered No: 1309669 (England)
  • Page 3 The warranty will cease to operate if the equipment is not returned in the original packaging and with correct documentation for a claim to be processed. All claims are at the sole discretion of Adam Equipment. This warranty does not cover equipment where defects or poor performance is due to misuse,...
  • Page 4 E-mail: info@adamequipment.com.cn © Copyright by Adam Equipment Co. Ltd. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.