Silex technology Wireless Dock Setup Manual

Feb, 2007
English

Features

Wirelessly connect iPod with PC or Mac
Users can synchronize with a Windows or Macintosh computer
running iTunes over an 802.11g wireless network so there is
no need to move the iPod back to the computer every time
you want to transfer new songs or videos.
Supports S-video port, line port, and Apple Remote
You can share your iPod with your family and friends on audio
and video devices by connecting to the S-video port and the line
out audio port. It also supports the Apple Remote (sold
separately by Apple Computer, Inc.), so you can sit back, relax and
enjoy. You do not have to stand up to skip to the next track.
Charge your iPod
You can charge your iPod battery by connecting your iPod to
this product. (Please note that power needs to be applied for
this product to charge your iPod.)
Easy configuration
The "Wireless Dock Setup" software included includes a software
wizard allowing you to easily set it up using either a 10/100 network
or using the iPod.. You can easily configure this product by
answering the questions on the screen.
2
Perform Setup
This step explains how to configure the IP address using the
configuration utility in the Wireless Dock Setup CD.
Configuration can be done on either a Windows or Macintosh
environment.
Please refer to the back of this document when configuring this
product from a Macintosh.
<<< Windows environment >>>
1.
Click Start - Control Panel. Open the Security Center click
Windows Firewall. Click the Exceptions tab. Check the File and
Printer Sharing checkbox. Click OK.
2.
Connect your iPod to a PC using the
USB cable bundled with the iPod.
(Do not use this product yet.)
3.
iTunes will automatically start when the iPod is recognized.
If you have configured iTunes to not automatically start when connected
to an iPod, click Start - Programs - iTunes - iTunes.
4.
Select the iPod icon in the iTunes DEVICES list on the menu on the
left, and check the Enable disk use option.
(1) Select iPod
(2) Click Enable disk use
(3) Click Apply
5.
Please insert the Wireless Dock Setup CD into your PC.
6.
Click Wireless Dock Setup
* If the screen does not appear automatically, open My Computer, select the
CD-ROM drive and execute Autorun.exe.
Thank you for purchasing the Wireless Dock for iPod (this
product).
This setup guide, "Wireless Dock Setup Guide", provides
information on how to configure and use this product in a
wireless network environment using a Windows XP or
Macintosh computer.
Before setup, please read carefully the "Safety instructions" in
the online manual included in the CD-ROM to properly
configure this product.
Laden Sie die deutsche Installationsanleitung von unserer
(De)
Webseite herunter. Die Adresse finden Sie auf der Rückseite
dieses Dokuments unter "Troubleshooting".
Veuillez télécharger le guide d'installation en français à partir
(Fr)
de notre site Web. Reportez-vous à la section "Troubleshooting"
située au dos de ce document.
Scaricare la guida all'installazione in italiano dal nostro sito
(It)
web. Consultare la sezione "Troubleshooting" sul retro di questo
documento per conoscere l'indirizzo della home page.
Descargue la guía de configuración en español desde nuestro
(Es)
sitio Web. Consulte la sección "Troubleshooting" en la contraportada
de este documento para obtener la dirección del sitio Web.
O guia de configuração em português está disponível para
(Pt)
download de nosso site na web. Consulte na "Troubleshooting"
no verso deste folheto o endereço do site na web.
Contents
Wireless Dock for iPod
Power Supply
iPod Dock Adapters (5)
Audio Cable
Wireless Dock Setup CD
(Configuration utility, online manual)
Setup Guide (this document)
Warranty Booklet
Supported Operating Systems
Windows XP, Windows 2000
Mac OS X 10.2.7 to 10.4.x (PPC version)
Mac OS X 10.4.3 or later (Intel version)
* Please visit our website for the compatibility status of the latest
version of each operating system (OS).
Safety instructions regarding the radio waves
Please note the following instructions:
- Do not use this product near medical devices such as a heart
pacemaker. The radio wave generated by this product may
interfere with the operation of these devices and may threaten
one's life.
- Do not use this product near microwave ovens. The radio wave
used by microwave ovens may cause interference to this
product.
7.
8.
9.
(1) Read the agreement
below.
(2) Click Yes.
10.
11.
(1) Select iPod set to
PC from the list.
(2) Click Next.
* The iPod will only show up in this list after you ENABLE DISK USE in iTunes as
shown in step 4. It will show up in this list as a similar name for your iPod under
DEVICES in iTunes as a Removable Disk.
Name of Parts
(5) AC Connector
(6) Network Port
(7) LED (Green)
(8) LED (Orange)
(9) S-video Out Port
(10) Line Out Port
(11) Ethernet Address
1

Before configuring this product...

Important: Before using this product, please make sure you have read the documentation and have
installed iTunes and the iPod hardware and software on your computer. Please refer to the iTunes
and iPod documentation for directions on how to use them.
To use this product over the wireless network, you need to configure the information appropriate for your network. This information needs to be
identical to the wireless devices on your network such as the access point. Please collect the following information before the setup.
Wireless mode
There is Ad hoc and Infrastructure mode. Select Infrastructure mode to
communicate via access point.
SSID
This name is used to identify devices to be connected to the wireless
network. It is also known as ESSID or Network Name.
Communication data is not encrypted.
No encryption
Encryption
(No information needs to be confirmed when
encryption is not used.)
method
WEP
Communication data is encrypted based on the
encryption key (WEP key).
WEP key size (64bit / 128bit) and WEP key must be the
same as other wireless devices on your network.
WPA / WPA2
Communication data is encrypted based on the
encryption key (Pre-Shared Key).
Pre-Shared Key and encryption mode (TKIP / AES) must
be the same as other wireless devices on your network.
12.
Click iPod.
When Get IP Address Automatically is selected, the IP address is
automatically obtained from the network. If you want to manually assign an
IP Address, select Assign IP Address and enter the IP address (mandatory),
subnet mask, and default gateway.
13.
Click Next.
Enter the wireless configuration information you wrote down in the Before
configuring this product section.
14.
15.
Click Next.
Go back to your iTunes Window and click the Eject icon to the right
16.
of the name of the iPod under iTunes DEVICES.
(1) Infrared (IR) Receiver
(2) Operation LED (White)
(3) iPod Connector
(4) Link Button
There are 5 adapters bundled to this product to support each
iPod. Choose the adapter that fits your iPod
Number iPod type
3 iPod mini
4
iPod
5
6
iPod with color display
7
Dock adapters for iPod nano and fifth generation iPod are bundled
with each iPod.
Write down your network configuration
Ad hoc (ch. )
Encryption
method
WEP key
or
Pre-Shared
Key
17.
Disconnect iPod from PC.
When your iPod displays a "Do not disconnect." message on its LCD, please
(1) Click Get IP Address
correctly remove your iPod according to the iPod manual. If you do not follow the
Automatically.
correct procedure for removing the iPod, the data may become corrupted.
18.
With the AC adapter unplugged, Place the
iPod in this product.
(2) Click Next.
19.
Connect the AC adapter to this product,
and plug the AC plug to the electrical
outlet.The configuration information
will be uploaded from your iPod. When
the transfer completes, the operation
LED (White) in the front will turn off.
20.
The white operation LED of this
(1) Enter wireless
product will change from ON, to OFF, to
configuration information
ON, and then starts flashing. The
configuration is completed when the
LED starts flashing.
(2) Click Next.
21.
(1) Click Use this computer.
22.
(2) Click Next.
(1) Confirm the configuration
parameters.
23.
(2) Click Execute.
24.
Click remove button
Configuration of this product is complete.
Please refer to the back of this document
for operation instructions.
(12) Dock Adapter
Numbers from 3 to 7 are indicated on the
adapter.
/
Infrastructure
WEP
/ /
WPA WPA2
(Open / Shared)
Click Next.
(1) Click Yes.
(2) Click Finish.
(1) Click Yes.
(2) Click Finish.