For further details about the Address Book feature, see "Finding
an Address Book Entry" on page 82.
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the
Voice Call
Call Waiting Menu to Activated. You are notified of
an incoming call by a call waiting tone.
To answer a call while you have a call in progress
Touch and slide Accept or
1.
incoming call. The first call is automatically put on hold.
To switch between the two calls, touch Swap.
2.
• Swap: Places the current call on hold and then activates the
previous call.
To end a call on hold
Touch the On hold tab and touch
1.
caller you wish to disconnect.
Press
to end the current active call.
2.
43
Settings
Calls
to answer the next
adjacent to the
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, all calls can be joined together. You
are notified of an incoming call by a call waiting tone.
Note: The Join option combines all of the calls you have established with
your phone (both active and on hold).
Swap places the current call on hold and then activates the previous
call.
This feature joins all of the calls you have established with your
phone (both active and on hold) into a multi-party call.
Press
to answer the first incoming call.
1.
Press
or Accept to answer the next incoming call.
2.
The first call is automatically put on hold.
Join the first two callers into a single multi-party call by
3.
touching Join.
To disconnect one of the callers, touch Split.
4.
The connected numbers will be displayed. Select the one
5.
to be taken out of the Multi-party call and put on hold.
Press
to end the call with the caller on hold.
6.
7.
Press
again to end the call.