Lock Applications; Change Phone Password - Samsung Evergreen a667 User Manual

The following options are available:
– Off: the phone connects directly to the network when you switch
it on.
– On: you must enter the PIN each time the phone is switched on.
Note: Before disabling the Check PIN Code feature, you must enter your PIN.
You can obtain your PIN from an AT&T customer service
representative.

Lock Applications

Using this option you can lock various applications. Once you
lock the contents, you must enter the phone's password to
access the associated menus.
Note: The first time you access the password screen, you are prompted to
create a password.
The applications options are:
– All
– IM
– Messaging
– Recent Calls
– My Stuff
– Calendar
– Tasks
– Memo
57
– Address Book
Set FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM card,
allows you to restrict the outgoing calls to a limited set of phone
numbers. The following options are available:
– On: you can only call phone numbers stored in the FDN contacts list.
You must enter your PIN2. The following options for entering FDN
contacts are available through the Address Book:
• Full length entries or wild cards can be entered in to the FDN list.
• A full length number with a specific contact name can be entered
into the FDN list.
• Wildcard entries allow you to dial a range of number with a single
entry: ex. 555 – All dialed numbers that begin with 555 are
allowed. Numbers that do not match the conditions in the FDN list
are restricted.
– Off: you can call any number.
Note: Entering an asterisk (*) is not required for wild card entries.

Change Phone Password

This option allows you to change your current phone password to
a new one. Once you enter a new password, you are asked to
confirm it by entering it again.