Download Print this page

Geofire Agrippa User Instructions

Acoustic pillow alarm

Download this manual

Acoustic pillow alarm

user instructions

This product is set by default for use with an alarm sound level of at least 75dB. Please read this leaflet

thoroughly before beginning setup.

Quick setup

1. Slide off the pillow pad and remove the battery

cover.

2. Insert the batteries the correct way up. The

orientation is marked in the battery compartment.

3. Clip the battery cover into position.

Email: enquiries@geofire.co.uk

www.geofire.co.uk

Using the unit

1. Place the pillow pad underneath the pillow you

intend to sleep on.

2. In the event of a fire, the pillow pad will vibrate

and the unit will flash. The word 'fire' will also be

present on the display.

1-11-9586 Issue D

L ow B attery

Status

S nooze / +

B ac k light

S et

A larm

Time

A larm on-off / -

Need help?

Do you have a question about the Agrippa and is the answer not in the manual?

Page 1 Acoustic pillow alarm user instructions Email: enquiries@geofire.co.uk www.geofire.co.uk This product is set by default for use with an alarm sound level of at least 75dB. Please read this leaflet thoroughly before beginning setup. Quick setup Using the unit 1. Slide off the pillow pad and remove the battery 1.
Page 2: Setting The Time
Setting the time 1. Press and hold the ‘Set Time’ button. Status Status L ow B attery Press 3. When the alarm triggers the pillow pad will hold vibrate. Pressing the ‘Snooze’ button will pause the alarm for five minutes. 2.
Page 3 13 seconds, the acoustic circuit is disabled (see, disabling the unit). This mode should only be used when in consultation with Geofire. Low battery LED: If the low battery LED is lit, the batteries are low and should be replaced Maintenance immediately.
Page 4 2. Press ‘+’ until option 7 is shown (PΞ7). If the alarm sound is generated by a bell, you 3. Start the fire alarm sounding in the appropriate may find that the Agrippa is sensitive to general location. background noise after the learning process. This can be improved by selecting command option 8 4.