ClearSounds Quattro 4L Quick Start Manual

4.
PAIRING AND CONNECTING THE QUATTRO 4L MICROPHONE
The BT4 mic comes paired out of the factory. However if for some reason it was removed from the
paired list, these are the instructions to "re-pair" it.
PAIR
STEP 1: Remove the
BT4 Removable Mic
from the Quattro 4L.
ACTIVATE & USE
STEP 1: Place BT4
Removable Mic in a
position that best captures
the voice(s) that you want to
hear. On the BT4 Removable
Mic, press the multi-
function button and the
Mic will become active.
Cable Clip: The headset cable and Quattro
4L cable fit in the clip with ease. Use it to
keep your cables from getting tangled.
STEP 2: Ensure QUATTRO
4L is turned off. Press and
hold multi-function
button for approximately
six seconds, until "Pairing"
is announced.
STEP 2: To deactivate Mic,
press and hold multi-
function key on the Quattro
4L or the multi-function
button on the BT4 Mic.
The QUATTRO 4L
announces call terminated.
STEP 3: On the
Mic, press and hold
BUTTON until light
flashes red and blue.
TIPS: The QUATTRO 4 (and/or mic)
turns itself off in ten minutes when
left completely idle.
The BT4 Removable Mic must be
within 30 feet of the QUATTRO 4 to
operate correctly.
For optimum performance use the
BT4 Mic Clip (sold separately)

QUICK START GUIDE

"Paired"
STEP 4: The QUATTRO
4L announces Paired,
and then Device
(number) connected.
-and-