Download Print this page

Create table 546Wd Assembly Instructions

Table tops

Advertisement

Quick Links

Assembly Instructions
TABLE TOPS
546Wd Oval
Plank Extension
42" x 57"– 87"
547Wd Square
Plank Extension
60" x 45"– 75"
548Wd Rectangular
Plank Extension
42" x 66"– 96"
550Wd Rectangular
Butcher Block Extension
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read
both the Assembly Instructions and Finishing Hints
before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
40" x 66"– 96"
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
that is defective or missing or damaged during
assembly. Please directly contact Whittier
Wood Products customer service department
(by phone, fax, mail or email) for a replacement
part.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). Or you may leave a
message 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this page),
the part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within one or two business days from the time
we receive your request. Please allow five to
ten business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
Store this item: 1~ in its box; 2~ in a dry place;
3~ in temperatures that range from 40° to 90°
(not on a cold or possibly damp cement floor).
Inspect your furniture periodically for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any part
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
Rev. 10/09

Advertisement

loading
Need help?

Need help?

Do you have a question about the 546Wd and is the answer not in the manual?

Questions and answers

Summary of Contents for Create table 546Wd

  • Page 1 TABLE TOPS that is defective or missing or damaged during assembly. Please directly contact Whittier Wood Products customer service department (by phone, fax, mail or email) for a replacement 546Wd Oval part. Plank Extension Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Page 2 546Wd, 547Wd, 548Wd & 550Wd Extension Table Top — Parts List TOOLS REQUIRED: Phillips Screwdriver, Wood Glue Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name.
  • Page 3 GLUE ALL PINS IN THIS STEP The lever locks are located outside of the aprons on the 546Wd & 550Wd. Fig. 1a Fig. 1 Fig. 1b 1. Lay the Table Top and the Leaves (Ac) face down on a clean, protected surface. Make sure the arrows stamped on the table ends and leaves face each other.
  • Page 4: Getting Started

    Finishing Hints Choosing the Finish: Rubber Tack cloth #220 & #320 1. Choose a finish that will meet your expectations for gloves sandpaper Drop cloth the product you are finishing. Are you matching Rags Mineral spirits Paint brushes existing furniture or do you want a “natural” finish? Paper towels (bristle and Masking Tape...

This manual is also suitable for:

548wd547wd550wd