Advertisement
The needle is sharp, use care when working with the needle to avoid injury.
Keep away from children.
When not in use the machine should always be kept in a locked position.
Insert/Replace Batteries (not included):
Note:
Make sure machine is in the locked position prior to battery
replacement.
To open the compartment, press down on the arrow with your thumb and
push in the direction of the arrow (Figure 1).
Insert four AA batteries in the battery compartment (Figure 2).
Once batteries are inserted, replace battery cover by sliding it back and
clicking into place.
AC/DC adapter (not included)
Adapter must be 6V 800mA. Plugging in an adapter that has different ratings
could damage the machine and adapter.
Ensure the machine is in the locked position (Figure 3).
Raise the needle arm to the highest position by turning
the rotary wheel. (Note: The rotary wheel can be turned
in either direction (Figure 4).
Lift up the fastening plate making sure not to push
down on the needle arm (Figure 5). The arm can still
be moved manually even when the machine is in the
locked position.
Place the fabric to sew underneath the fastening plate.
Thread two inches of thread through the needle.
Instructions Manual
For Your Safety:
Directions for Use:
Page 2
Advertisement
