Page 1
V O YA G E ™ S T E A M E R I N S T R U C T I O N S M A N U A L...
Page 3
Cautions for the first use Remember, safety should be your first priority. 1. Never fill the water reservoir when the power cord is plugged in. 2. Allow the appliance to cool for at least 5 minutes after it has been used. 3.
Safety Instructions 1. Whenever you need to step away from the steamer, make sure that you unplug it and leave the steamer in a vertical position. 2. Please keep out of reach of children. 3. DO NOT operate steamer if it has been dropped, damged or has malfunctions in any way.
Filling with Water 1. Before filling the water tank, make sure the steamer is unplugged and held straight or placed on a flat level surface. 2. Open up the water tank by turning the steaming head to the Left and add cold clean water by using the measuring cup. Carefully monitor the water tank level during this process to prevent overfilling.
Page 7
Steaming 1. Fill the water tank in accordance with the “Filling with Water” instructions. 2. Plug the cord into the outlet. 3. By pressing the ON/OFF button, the steamer will automatically start heating up to an adequate and optimal steaming temperature. 4.
Steaming Tips 1. Steaming on both sides of the fabric will help to remove stubborn wrinkles. 2. Delicate fabrics need to be steamed carefully to avoid damage by water spotting. 3. Drapery and curtains can be steamed while still hanging. 4.
Troubleshooting Problem Possible Reasons Solution Plug the steamer power cord The steamer is not plugged in into an electrical outlet No light on the switch Reset the household circuit The household circuit breaker has breaker or replace the blown been tripped; there is a blown fuse fuse.
Page 15
EXTRA LARGE PROTECTIVE IRON & BOARD SUPER MAGNETIC PROTECTIVE IRONING MESH IRON CASE HOLDER IRONING MAT (MODEL: ER1020) (MODEL: ER1010) (MODEL: ER1025) (MODEL: ER1050)
Page 16
THANK YOU FOR PURCHASING PRODUCTS FOR MORE INFO PLEASE VISIT: WWW.EUREKAGARMENTCARE.NET...
Need help?
Do you have a question about the Voyage and is the answer not in the manual?
Questions and answers