Page 1
HDMI® EXTENDER over single UTP Cable with IR Control 31001074 SKU: User’s Manual...
Page 2
Thank you for purchasing HDMI® Extender. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. INTRODUCTION The HDMI Extender over single UTP cable with IR extends high definition video and audio signals and IR, at a distance of up to 164ft (50m) over a single Cat5e/6 cable.
PRODUCT OVERVIEW Transmitter HDMI In: Connect HDMI devices EDID: Right - The extender will copy HDMI loop out display EDID information to source Left - The extender will copy the Receiver dispaly EDID to source HDMI Out: Connect to TV or monitor IR Out: Connect the IR Blaster cable which should be in directly placed with the equipment to be controlled Power Indicator: Illuminate when connected with power supply...
Page 4
RX EQUALIZER DISTANCE ADJUST If image on the display is flickering or blinking, adjust the EQ switch to improve the cable skew. MAX stands for the strongest HDMI signal for the longest possible transmission length while MIN stands for the weakest HDMI signal for short transmission length.
CONNECTION DIAGRAM SPECIFICATIONS Video Bandwidth 4.95Gbps Video Support 480i / 480p / 720p / 1080i / 1080p@60 Audio Support Surround Sound (up to 7.1ch) or Stereo Digital Audio Transmission Range HD (1080p 24-bit color) - up to 164ft (50m) Input TMDS Signal 3.3 volts Input DDC Signal 5.0 volts/P-P...
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Omnigates, including the use of non-approved antennas, could void the user’s authority to operate this device.