Download Print this page

Promaster XtraPower PRO Manual

Nimh rapid charger kit for rechargeable nimh aa/aaa batteries

Advertisement

Quick Links

XtraPower PRO NiMH Rapid Charger Kit
For Rechargeable NiMH AA/AAA Batteries
Please read and follow all instructions before using this product.
IMPORTANT WARNING:
This device is for charging rechargeable NiMH Batteries ONLY. Inserting any other batteries may damage the device,
destroy the batteries or cause injury to the user.
CAUTION:
Always unplug the charger when it is not in use.
Always unplug your charger from the power source before cleaning it.
Do not use, place or store the charger where it may come into contact with water or moisture.
Do not use under direct sunlight.
Do not short-circuit the metal contacts on the battery or the charger.
Do not disassemble, deform or reconstruct any part of the charger.
OPERATING INSTRUCTIONS:
1. To charge, flip up the AC plug on the back of the charger and plug it into a household AC outlet.
2. When inserting batteries into the charger, please follow the embossed diagram with the correct direction of polarity on
each charging slot. To protect the user and batteries, the charger will NOT charge the batteries if they are placed into the
charger with reversed polarity.
3. This charger is designed to charge two or four AA /AAA batteries of the SAME SIZE, BRAND, and CAPACITY. You may
select whether you want to charge two or four batteries by setting the slide-switch at the center of the charge slot. The
available options are shown below :
3.1 Four AA batteries with the slide switch set to the symbol "4."
3.2 Four AAA batteries with the slide switch set to the symbol "4."
3.3 Two AA batteries in the two left battery slots with the slide switch set to the symbol "2."
3.4 Two AAA batteries in the two left battery slots with the slide switch set to the symbol "2."
4. The RED LED indicator will turn on when the batteries are inserted and will remain on until the batteries are removed.
5. Please remove the batteries after they are fully charged. While it is safe to leave batteries in the charger, do not leave
batteries in the charger for extended periods of time.
IMPORTANT NOTES:
1. All batteries will naturally discharge themselves over time even if they are not in use. To prolong their service life, we
recommend that you do not let a battery sit idle for more than two months without recharging. Be sure to recharge your
batteries before you use them.
2. The batteries and charger will get warm during charging. This is normal.
3. Always insert the battery into the charger with the correct polarity.
4. Always keep metal contacts on both charger and battery clean by wiping the surfaces with a dry, soft and clean cloth.
(see Figure 1)
Figure 1

Advertisement

loading

Summary of Contents for Promaster XtraPower PRO

  • Page 1 XtraPower PRO NiMH Rapid Charger Kit For Rechargeable NiMH AA/AAA Batteries Please read and follow all instructions before using this product. IMPORTANT WARNING: This device is for charging rechargeable NiMH Batteries ONLY. Inserting any other batteries may damage the device, destroy the batteries or cause injury to the user.
  • Page 2 5. Please be sure the pair of batteries to be charged together were used together and are the same brand, size and capacity rating. The charger may not work properly if you fail to follow this instruction. 6. Remove your batteries from the device (such as digital camera, music player or other portable electronic device) after use. These devices will continue to drain a small amount of current from your batteries even if the device is turned off.